Okay here are some pics from a crappy iphone 4 and that is the best I got right now. These pics are of the xbox 360 that I hooked rater up to and the xbox 360 that is not letting me read the nand. I didn't want to make another post so I just put it here. If I should make another post than please let me know. Just want to make sure the connections look okay. I'm not great at soldering but haven't broke anything yet and have repaired a few. So thats good enough for me. 1) With the JAsper 16MB I would like to know if anyone can tell me why it will not read the nand. I have resoldered it many times but remind u I have resoldered numerous times and I have never ever had this much problems reading a nand. I even hooked the falcon up and soldered on the same nandx wires that I was using for the Jasper and it read fine. You will see that in the log. 2) The falcon I would like to use rater to check timing. PLease tell me if I have everything connected properly. Anyhoo... http://imgur.com/a/ypHyL Images of the Falcon http://imgur.com/a/QRngm Images of Jasper 16MB This first log is of the falcon Console Type: Falcon Programmer Used: JRP v2.0 NAND Size: 16 Dashboard version: 17349 CB Version: 5774 Screenshot of NAND details from J-Runner: http://imgur.com/WPII6So J-Runner log: Version: 10 Flash Config: 0x01198010 01198010 Xenon, Zephyr, Opus, Falcon CB Version: 5774 Falcon/Opus Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin Reading Nand Done! in 3:30 min:sec Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump2.bin Initializing nanddump1.bin.. Falcon/Opus Jtag Selected Nand Initialization Finished Reading Nand Done! in 3:30 min:sec Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump3.bin Comparing... Nands are the same Reading Nand Done! in 3:30 min:sec Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump4.bin Comparing... Nands are the same Reading Nand Done! in 3:30 min:sec Comparing... Nands are the same Glitch2 Selected CR4 Selected Falcon Manually Selected ECC created Version: 10 Flash Config: 0x01198010 Writing Nand image_00000000.ecc Done! in 0:18 min:sec Detailed Description of the Problem: Not booting to Xell Was the console working before you started: Y Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Y How long is the light on for each time: 1 sec The log below is for the Jasper Console Type: Jasper 16MB Programmer Used: JRP v2.0 NAND Size: 16MB Dashboard version: 17489 CB Version: 6754 Screenshot of NAND details from J-Runner: http://imgur.com/0nXaEjj J-Runner log of when it worked: Version: 01 Flash Config: 0x00023010 00023010 Trinity, Jasper 16MB CB Version: 6754 Jasper 16MB Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin Cancelled Version: 01 Flash Config: 0x00023010 00023010 Trinity, Jasper 16MB CB Version: 6754 Jasper 16MB Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin Reading Nand Done! in 3:39 min:sec Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump2.bin Initializing nanddump1.bin.. Jasper 16MB Jtag Selected Nand Initialization Finished Reading Nand Done! in 3:38 min:sec Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump3.bin Comparing... Reading Nand Nands are the same Done! in 3:38 min:sec Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump4.bin Comparing... Reading Nand Nands are the same Done! in 3:39 min:sec Comparing... Nands are the same Glitch2 Selected Jasper 16MB Manually Selected Version: 01 Flash Config: 0x00023010 Writing Nand JASPER_CR4.ecc Done! in 0:18 min:sec J-Runner log of when it didnt work: Tuesday, October 06, 2015 10:30:42 PM J-Runner v0.3 Beta (7) Started WARNING! - Your selected working directory already contains files! You can view these files by using 'Show Working Folder' Button Checking Files Finished Checking Files Downloaded *xeBuild/17349/_glitch.ini Downloaded *xeBuild/17349/_glitch2.ini Downloaded *xeBuild/17349/_glitch2m.ini Downloaded *xeBuild/17349/_jtag.ini Finished Checking Files Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 00 Wrong Version. Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Could not find a part of the path. ================================================== = Tuesday, October 06, 2015 11:07:37 PM J-Runner v0.3 Beta (7) Started WARNING! - Your selected working directory already contains files! You can view these files by using 'Show Working Folder' Button Version: 01 Flash Config: 0x00000000 Can not Continue Checking Files Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Finished Checking Files Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x01198010 01198010 Xenon, Zephyr, Opus, Falcon CB Version: 5774 Falcon/Opus Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin Cancelled Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Version: 01 Flash Config: 0x00000000 Can not Continue Detailed Description of the Problem: Not reading nand Was the console working before you started: Y Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: N How long is the light on for each time: N/A
Well in my experience flash Config: 0x00000000, usually appears if one or more of the nand points are not soldered correctly. Most of the time it's probably a cold solder joint or your JR Programmer wires are not wired correctly. Other possibilities include, a faulty JR Programmer/Nand-X. Make sure to use flux and clean up any flux with isopropyl alcohol to ensure non of your points are shorting out and your points are all clean. As a last resort, if you are using a clone JR Programmer or 3rd party nand flasher, I would suggest reading/writing the nand with alternative software, specifically nandpro 20b or try different nandpro versions until you find one which reads/writes the nand correctly. I had this issue using an old Matrix USB Spi nand programmer, and using nandpro 20b worked first try for me. Hope you get this sorted mate.
