How To Install FakeAnim On Jtag/RGH

Discussion in 'Jtag & RGH Tutorials' started by Heavy Smoker, Jan 16, 2015.

  1. Heavy Smoker

    Heavy Smoker Battlefield Junkie XPG Retired Staff
    205/282

    4,761
    2,717
    205
    Sep 26, 2014
    Smoker's Paradise
    Console:
    Xbox
    How To Install FakeAnim On Jtag/RGH
    [​IMG]
    Overview: This release will allow for fake animations in the form of WMV 9 encoded videos to be played on the console prior to showing the dashboard. Since this file is only loaded after the console is ready there will be a minor increase in boot times. This has no impact on glitch times since the glitch occurs prior to this file ever being loaded. The Delay and Calibration settings are designed to allow the user to tweak the video to their specific system and display. This tweaking makes it so that the video does not get cut off. Please read below for a full set of instructions:

    Intallation & Configuration:

    Important: Do NOT attempt to delete bootanim.xex if you are unable to restore to a previous NAND dump via hardware.

    Requirements: DashLaunch v3.03+ is required for this to work.

    Installation:

    Copy over all files in the archive to the HDD or USB of the 360.
    Edit your launch.ini to have fakeanim = point to the fakeanim.xex
    Reboot the console and make sure the application runs. Ignore the Red Screen being present for a while.
    Once you have verified the application is launched remove bootanim.xex** from the consoles Flash. (Use FS3 or FTP).
    Reboot the console and pay attention to how long the red screen is displayed.
    Calibration takes place in the fakeanim.ini file and should be checked with a cold boot in order to force the GPU to initialize.
    Once calibration is complete edit the fakeanim.ini and set calibration to 0

    Calibration Notes:

    To adjust the length the red screen is shown. Add to the number to increase the time take delay. Take away to decrease it.
    The delay function is used to ensure the video does not get cut off during the monitor and GPU starting each "delay" is 250ms. Valid entries are between 0 and 100.
    For slims start around 5.
    For Phats start around 13.
    The goal is to get the red screen to show for the least amount of time possible on the Evil Laugh wmv when performing a cold boot.
    Video Tutorial
    Fakeanim Videos
    https://www.youtube.com/watch?v=LjU01z0xMnE​
    https://www.youtube.com/watch?v=9qjzQkeytHQ​
    https://www.youtube.com/watch?v=ERQOEBhqWS4​
    You can also make your own boots just make sure its a wmv file and place in jukebox folder in fakeanim on HDD. You can add loads and it will randomly choose one to play on boot.
     
  2. Ro

    Rocky Guest

    On the ball with these tuts ;)
     

Share This Page