things you will need a jtag/rgh xbox 360 and usb that is fat32 xex menu/dashlaunch/FSD-freestyle dash step 1 download your title update from this site xboxunity.net im going to do this for MW3 step 2 open your usb on your conputer and make two folders name the first one this 415608CB then open the 415608CB folder you just made and make a new folder in 415608CB and name it 000B0000 step 3 in the 000B0000 folder copy the tu00000008_00000000 that you downloaded and paste it in 000B0000 folder so it should look like this 415608CB/000B0000/tu00000008_00000000 step 4 now go to jtag/rgh xbox 360 launch xex menu then launch dashlaunch step 5 once in dashlaunch go to behavior enable conpatch and enable xblapatch step 6 now press RB and go down to HDD press X to save step 7 now press RB again go down to (install this) press A once you press A you will see HDD press X on HDD then press B then go to lauch press A then go to HDD or where you installed FSD once in FSD folder press A on defaultxex to launch FSD FSD should boot up step 8 in FSD plug your usb into your xbox then go to utilities then file manager when in file manager you will see game HDD1 and usb go to HDD1 content/0000000000000000/ now go to usb press X on 415608CB to high light it then copy it to the HDD1 content/0000000000000000/ now back out of file manager and take out the usb step 9 now wait 10 seconds then press xbox guide button and press A on FSD to reboot once rebooted go to xbox 360 games then MW3 press Y go down to title updates and it should be there your done