Burned Discs were working but now they are not.. URGENT HELP

Ik like to see a log or de errors it gives in abgx and imgburn and type of media and burner u use
The older version of img what i believe is 3.7? Current 3.8? seems to work not that good on iso mods.

 

Is there a problem with the latest imgburner?

I have been trying to get my waw iso's working without luck.. Download 2 modded iso's and both got stuck at 41% after multiple tries. I figured it was just bad iso's so I downloaded a clean waw iso and it checked all green in ABGX so i did the modding and then proceeded to burn it onto a Verbatim 8.5GB DVD+R DL disc, when hotswapping it got stuck at 47% after multiple tried. No scratches what so ever still says disc may be scratched or dirty. Any help? I've wasted 3/5 discs now and theyre expensive

 

img burn settings i use work every time try these m8, tools, write, on page 1, tick all but these ones, use normal for bd video disks, dvd + r reserve track, dvd + r dl only write to first layer, dvd ram / bd-re fast write, enable burn proof, make sure these ones are not ticked. and the three at the bottom untick them as well. now go to i/o page two and set buffer to max 1024mib and thats it m8 your good to go.

 

Probably either a bad burn or your drive may be like mine where you have to tilt it at a specific angle for it to be able to read burnt games for some reason.

 

oh if your hot swapping install game to hard drive might work,

 

I am hotswapping and when I install it stops, Can you take a screenie of your settings? heres my settings:

http://gyazo.com/c43376c736d71070524e5951f0ef5aa9
Don't mind what my driver says since im just showing the settings this isnt the pc i use to burn it.

http://gyazo.com/0ddd4e8a817299a8ee3301b84965572c
http://gyazo.com/a6c5c4b01ca0b1edf624e0bc99c49ab2

 

Are you using a fresh iso each time? Don't worry about changing your settings for ImgBurn because that isn't your issue, as your game has already downloaded fine.

 

Set layer break to calculate optimal and use the .dvd file.
If there are no red marked errors in your log from img burn u must be fine with the new version.
On liteon ihas i have good results on the old version of img burn.

 

No thats no problem but you can try that out real easy!

 

Didn't work Wasted another disc now :'(

 

What i do and have burned over 200+ games with only one fail dirty disc that stops about 40% when hot swapping. Download clean iso BAN-ME-PLEASE with BAN-ME ,extract to desktop if its a rar. Now right click both images ,goto properties and make sure there NOT read only then press ok, i always delete the small dvd image as abgx always make another one...

Now run it through abgx , i have added alot of stealthfiles in a folder that should come with abgx (you should not need them).
If all is fine after running it through abgx ,replace files with your modded ones and make sure there not bigger in size.
Now download img burn 2.5.7.0 and goto settings then write and click on user specified and enter 1913760 now press ok. Then burn the disc do not tick anything else.


Edit: untick verify in your first pic
and download the old img 2.5.7.0 and use my settings above.......................

 

keep all the dafault settings?

 

i just use default settings and burn them on 2.4x and it works fine for me

 

100% default settings, input the code and use v2.5.7.0 and it should work fine?

 

if you search and download the one i use only change what i put above ,thats all you need (goto settings then write and click on user specified and enter 1913760)

 

Thats why i ask for logs and burner used , then we can talk about settings

 

My pc and old mans used to not be able to select the dvd drive if it can not write on these discs. So i got a usb burner and a sata cable burner and both work perfect with the layer break set to 1913760 but i am forced to use 4.0x for the speed.