Hi mate, do you know much about ISO modding? I need some help, this was working yesterday as i burned some gtav mods. However i burned 4 discs now and each time when the rockstar symbols load up the game freezes and my xbox freezes. I have all the programs, burners ect like i said they were working yesterday, the disc i am using at the moment works, I did however burn a DVD and since i burnt the DVD through ImgBurn the Games no longer burn, I believe it maybe either a setting there or extracting the default.xex and replacing might not be saving correctly? If anyone can help me here or over skype that would be great. P.s. its probably a really simple solution however im pretty tierd and cannot seem to think of the solution. Thanks
Ik like to see a log or de errors it gives in abgx and imgburn and type of media and burner u use The older version of img what i believe is 3.7? Current 3.8? seems to work not that good on iso mods.
Is there a problem with the latest imgburner? I have been trying to get my waw iso's working without luck.. Download 2 modded iso's and both got stuck at 41% after multiple tries. I figured it was just bad iso's so I downloaded a clean waw iso and it checked all green in ABGX so i did the modding and then proceeded to burn it onto a Verbatim 8.5GB DVD+R DL disc, when hotswapping it got stuck at 47% after multiple tried. No scratches what so ever still says disc may be scratched or dirty. Any help? I've wasted 3/5 discs now and theyre expensive
img burn settings i use work every time try these m8, tools, write, on page 1, tick all but these ones, use normal for bd video disks, dvd + r reserve track, dvd + r dl only write to first layer, dvd ram / bd-re fast write, enable burn proof, make sure these ones are not ticked. and the three at the bottom untick them as well. now go to i/o page two and set buffer to max 1024mib and thats it m8 your good to go.
Probably either a bad burn or your drive may be like mine where you have to tilt it at a specific angle for it to be able to read burnt games for some reason.
I am hotswapping and when I install it stops, Can you take a screenie of your settings? heres my settings: http://gyazo.com/c43376c736d71070524e5951f0ef5aa9 Don't mind what my driver says since im just showing the settings this isnt the pc i use to burn it. http://gyazo.com/0ddd4e8a817299a8ee3301b84965572c http://gyazo.com/a6c5c4b01ca0b1edf624e0bc99c49ab2
Hi guys, No its not a fault with my burner ect as i burnt a disc yesterday morning and it worked perfectly fine, Il try and change ImgBurn settings as it seemed to stop burning them properly after i burned a disc so maybe i changed a setting without realising,
Are you using a fresh iso each time? Don't worry about changing your settings for ImgBurn because that isn't your issue, as your game has already downloaded fine.
Well i downloaded the ISO for GTAV i know it works, nope just a new disk image file, well not new since windows does not recognise the change, But i know its a good iso as ive burn 2 disks with this iso before I know this sounds stupid but: On the folder / location of the image file and iso i have the default.xex and common file in there, but surly this should not affect it?
Set layer break to calculate optimal and use the .dvd file. If there are no red marked errors in your log from img burn u must be fine with the new version. On liteon ihas i have good results on the old version of img burn.
What i do and have burned over 200+ games with only one fail dirty disc that stops about 40% when hot swapping. Download clean iso BAN-ME-PLEASE with BAN-ME ,extract to desktop if its a rar. Now right click both images ,goto properties and make sure there NOT read only then press ok, i always delete the small dvd image as abgx always make another one... Now run it through abgx , i have added alot of stealthfiles in a folder that should come with abgx (you should not need them). If all is fine after running it through abgx ,replace files with your modded ones and make sure there not bigger in size. Now download img burn 2.5.7.0 and goto settings then write and click on user specified and enter 1913760 now press ok. Then burn the disc do not tick anything else. Edit: untick verify in your first pic and download the old img 2.5.7.0 and use my settings above.......................
if you search and download the one i use only change what i put above ,thats all you need (goto settings then write and click on user specified and enter 1913760)
My pc and old mans used to not be able to select the dvd drive if it can not write on these discs. So i got a usb burner and a sata cable burner and both work perfect with the layer break set to 1913760 but i am forced to use 4.0x for the speed.