Updated with official xeBuild 1.11 package(16547) , same process, new dash, follow tut in original post video added https://www.youtube.com/watch?v=yDQHGG4aats
great work, BTW is there men't to be no audio in the above video?, just asking. Also are you using a video capture card to get the window for your RGH where you can see Dashlaunch?
Yea there's no sound of any importance so no reason to waste the mb's of audio, yes it is an older "Roxio Game Capture" box(non HD model running on component cables so quality is not great) I stream it through either virtualdub or VLC media players, there is no software to do this, xbmovie is as close as it gets but only works on select games and on DevKernel or real XDK, also it does not stream, only records to the dev's host PC
sweet, when doing it like this (I just read the tut on OP) what about all the options that we would normally select on xebuild does this automatically recognize what you have and make the changes, seems great. also just wondering if you may know the answer to this as I can't find a reason or a fix for this, you know "xenon.elf" that's used on xell for either flashing nand using 360flash.xex and a updflash.bin and using it to play N64 emu, well I have a spare usb with xenon.elf and N64 EMU with tons of n64 games that used to work fine on my RGH since I updated it doesn't work, even tried booting 360flash tool using xenon.elf and it just stops at a point saying FatMount0 (somthing like that) which is slightly worrying now because as you know if anything goes wrong with my RGH using xell to say reflash my nand is a important thing if the console doesn't boot. No matter what I have tried using several different drives, different formats, even different mupen64, point is before I updated my dash all I had to do was plug in my usb pen drive with xenon.elf with mupen and games ( I had to unplug my 1TB external drive else it wouldn't work) but like I said nothing has changed it used to work fine but now nothing, cheers
Ensure xell is on latest version should be no issues then, and buy and install a hardware flasher so you don't have to worry about "if anything goes wrong", it's cheap insurance
lol its not that bad, just don't get it why after using this method xenon.elf doesn't work lol, nice image though , gotta give you a like for that one lol
what I asked earlier Begal I checked what xell I have and it says xell reloaded v.0.993-git-7466b6d, special corona compatible Xell version, I'm running RGH trinity, after some text scroll down it shows 2 mass storage devices which will be my IntMu and the usb I have plugged in with xenon.elf and it won't boot stuck at "Fat Mount uda0" as I said xenon.elf started fine before I used this method the first time nothing has changed only updated my nand, can you help with this. Any info you need or anyone can help with cheers well I have updated dashlaunch and "updserv" enabled and then run the "updatemyconsole" batch file and the cmd window opens and immediatly closes within a split second any advice I'm connected to my RGH no problems, I even take a look in advanced information on dashlaunch and it says Updsvr is running and shows my IP any ideas, the old one you did begal worked fine for me but this isn't can some one advise, tried using the stand alone server also its all connected but for some reason cmd closes immediatley after clicking on "updatemyconsole" batch file any help ?
Ok this is the part that I don't understand.. maybe because im totally n00b.. I have Dash Launch 3.10 already installed should I overwrite 3.11 files over 3.10 using FlashFXP to the xbox and then launch Installer/default.xex from the file manager ?
just throw the dash launch 3.11 files (unzipped) on the same drive you have your old 3.10 on and then in file manager or xex what ever go to the dashlaunch 3.11 folder and then the installer folder and select default.xex file it will load DL and tell you that you have a never version do you want to install it select yes and go over to your drive and save by selecting "X" on controller and re boot (you can also install a DL folder to somewhere like your homebrew folder) and if you want just delete the old DL 3.10
Thank you for the help. it worked, avatar updated and now I have 16547 = ) But the kinect is still not working it is still telling me I have to update my xbox to use it.
well I don't know DL 3.11 is installed all my network is fine after selecting upserv in dashlauch I can check its running and it is I can connect to my rgh no issues with sdk, ftp everything I managed to get the "myupdatedconsole" to work by manually running it in cmd as clicking it for me just crashes maybe win 8 issue?, anyway this is all I'm getting> --------------------------------------------------------------- xeBuild v1.11.647 --------------------------------------------------------------- ---- { Update Mode } ---- data directory set from command line to '16547\' started, watching network for xbox...UDP wait timeout! failed to find xbox beacon ***** FATAL UPDATE ERROR: unable to find console! --------------------------------------------------------------- xeBuild Finished. Have a nice day. --------------------------------------------------------------- And I would really like to of used your version Begal as the xell files are newer and I hoped it would resolve my xell homebrew loading issue oh well
No worries mate glad I could help, as for the Kinect as long as the avatar update was installed your kinect will work as the kinect updates are packaged in the same files. Go to your metro dash (standard 360 dashboard) and let me know if your avatar stuff is showing and click on change avatar to check it all installed ok, if so check everything to do with your kinect first as its a new dash settings get reset and you'll need to sort those out before it will work, like configuring it, if all thats fine but no avatar stuff download the "$Systemupdate" for avatar update 16547 and change the "$S" to "$$" so it looks like $$ystemupdate and put the zipped file on a usb and plug it in and it will promted you to update and do so will fix it, but its more than likely you just need to configure your kinect in settings mate
