Here you Go http://www.ebay.co.uk/sch/i.html?_trksid=p5197.m570.l1313&_nkw=+IHAS124B&_sacat=0&_from=R40 http://www.amazon.co.uk/LiteOn-IHAS124-19C-Internal-Software-Included/dp/B0026N4U9Q
Hi, I have a problem with an ihas124-19B recently bought in burnermax payload tool. I insert the Verbatim DVD-R DL and it looks that the tool is not working: BurnerMAX Payload Tool - Version: 0.15 Found 1 CD/DVD drives F: New Media detected in drive F:\ BurnerMAX not enabled, YET ! Scanning: F:\ [ATAPI iHAS124 B AL0S] BurnerMAX not enabled, YET ! I've made a flash write according to inlien tutorials (however I think it was not necesary), and still same issue. I've tried several DVD. For a few seconds the tool is not responding and after 30 seconds it says: BurnerMAX not enabled, YET ! Please advise. Regards
With a IHAS 124B you don't need to use payload tool just find a tutorial to flash the BURNER MAX FW to the drive and then burn as normal with IMGBurn. Hope this helps
thank you for the prompt reply. Can you please future asist me; as said earlier I've followed a tutorial and I've written flashed with something found on internet: iHAS-124B-AL0S-MKM001MKM003-final.bin Now based on what you've said I've skipped the tool, but in imgBurn I get a bad result: 8,5 Gb