Update your RGH-Jtag to dash 17150 in 1-2 minutes! No flash drive or file transfers needed! What you will need: 1. Your Jtag or RGH Console connected to the same network as your PC 2. This updated file packThe link has been removed and i am in the process of reuploading a new version, seems to have been an issue with the patches that were released earlier, if you cant wait for the auto updater and want to do it manually, follow the link at the bottom of this post, the files have been updated over there. ******************************* It should be noted that we have found a bug in the V3 update server particularly concerning RGH1 Jasper consoles w/internal memory, so if you own one of these consoles you may have to manually update old school style, or wait for Team XeBuild to release the fix.******************************* I have now added dashlaunch properly into the updater so now it should work without any issues. However this version of dashlaunch is not built for this kernal and is not recommended to run the dashlaunch xex but to edit your settings via your launch.ini******************************* How To: 1. Extract the xeBuild17150 QuickUpdate ~XPG~.rar package onto your computer 2. Inside this package you will find updsvr_standalone_v3.zip. extract this package and transfer it to your Jtag/RGH, doesnt matter where and run the default.xex. From here dont touch the console and head back to your PC. 3. Go back to your Quick update folder and click "UpdateMyConsole.bat", your updater will open , and less than a minute later your update will be done and flashed! including avatars and dashlaunch!! (if console connection fails try the "UpdateMyConsole_ForceIP.bat" file) To use the ForceIP.bat file simply right click on the file and open in notepad, replace the IP with your RGH consoles IP and save the file, this bat file will now automatically connect and update the console attatched to this IP. Yes that is it, no fuss , no mess , no drives swaps , no file transfers!!!! You might have to edit an IP that's about it Huge thanks to XeBuild team , and JPizzle for his original tutorial on this, And a massive thanks to begalegal for the original XPG tutorial and files. I merely updated the tutorial, file pack and the .bat files to be compatible with 17150. #USER FRIENDLY!! Video is of an older update but follows the same process. [media]https://www.youtube.com/watch?v=yDQHGG4aats[/media] If you have any issues with the auto updater and need to build your image manually, please check out StarXPG's Post over here:http://www.xpgamesaves.com/topic/115610-full-release-17150-xebuild-gui-dashlaunch/ Enjoy
The link has been removed and i am in the process of reuploading a new version, seems to have been an issue with the patches that were released earlier, if you cant wait for the auto updater and want to do it manually, follow the link at the bottom of this post, the files have been updated already over there. http://www.xpgamesaves.com/topic/115610-full-release-17150-xebuild-gui-dashlaunch/