Philips by the look of it I also have 2 systems that don't work that were given to me awhile back but I never could fix them do to something to do with the motherboard. One I know has a TS-H943 drive (Toshiba/Samsung I believe) and the other I will have to locate to find out it's drive.
If it is a newer system, take off the faceplate, and where the drive is, there is a hole on the bottom right of the drive. In there you can usually see a wire. If it's yellow, you got a Liteon, but if it's white, you got a benq!
Well I will pass on the flashing thing for now. Just from a video I watched, It was a bit like wow too me so I will hold on that for now.
Oh man, I updated the NET frame thingy to 4 and now getting another error just opening the save in CONAN save editor on 360 Revolution. Error is as follows below::: Unhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately. Specified argument was out of the range of valid values. Parameter name: Begin offset or end offset is outside the bounds of the stream. Ok what now since this seams to be a new message I gotten here. Any sollutions??? Thanks, Badger1975
Well I am still stuck with my recent error above and still not able to edit saves. Anyone else know of what to do or should I just give up. Siiiggghhhhh!!!!!
Well I don't have one just at the moment now, do to I switch computers but something strange with the save I was trying to put through, it is showing in another program to have all that I added to it even though that error kept coming up so maybe it is working on this save after all this problems I am having. I will check tommorow and see if the save has what I want and if not I will send you the save FallenPredator. I will check on this tommorow also just to make sure I have it set to run as admin on the new PC I am using. I switched to an Intel PC from an Emachines one since I read something that intel is better at running these editors but I recall Dell being a better one or Sony PC. I will update further tommorow evening. Thanks, Badger1975
For you drive you want to download JungleFlasher and the latest LT+ FW from TeamXecuter. Here is the Tutorial. You will need to purchase a kit similar to this to extraxt your key and flash your drive. http://www.foundmy.com/oscom/x360usb-pro-monster-bundle-p-433.html
Another error again, possibly the same error on Conan when trying to open the save in the editor on 360Revolution Error-------> See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.ArgumentOutOfRangeException: Specified argument was out of the range of valid values. Parameter name: Begin offset or end offset is outside the bounds of the stream at PackageIO.Reader.Search(Byte[] Criteria, SearchType Type, Int64 Position, Boolean ReturnOnFirst, Int64 EndPosition, Boolean ThrowErrorIfNotFound) at PackageIO.Reader.SearchString(String Criteria, SearchType Type, StringType StringType, Int64 Position, Boolean ReturnOnFirst, Int64 EndPosition, Boolean ThrowErrorIfNotFound) at Revolt.Conan.() at Revolt.Conan.() at Revolt.Conan.(Object , EventArgs ) at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e) at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e) at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e) at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e) at System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met) at System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met) at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea) at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ScrollableControl.WndProc(Message& m) at System.Windows.Forms.ToolStrip.WndProc(Message& m) at System.Windows.Forms.ToolStripDropDown.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.17929 built by: FX45RTMREL ---------------------------------------- 360Revolution Assembly Version: 2.71.0.0 Win32 Version: 2.71 ---------------------------------------- Microsoft.VisualBasic Assembly Version: 10.0.0.0 Win32 Version: 11.0.50709.17929 built by: FX45RTMREL ---------------------------------------- System Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.17929 built by: FX45RTMREL ---------------------------------------- System.Core Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.17929 built by: FX45RTMREL ---------------------------------------- System.Windows.Forms Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.17929 built by: FX45RTMREL ---------------------------------------- System.Drawing Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.17929 built by: FX45RTMREL ---------------------------------------- System.Runtime.Remoting Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.17929 built by: FX45RTMREL ---------------------------------------- {e60be3da-4c28-4088-a420-dc439a52e068} Assembly Version: 0.0.0.0 Win32 Version: 2.71 ---------------------------------------- ForumConnect Assembly Version: 1.0.0.0 Win32 Version: 2.71 ---------------------------------------- DevExpress.XtraBars.v11.2 Assembly Version: 11.2.7.0 Win32 Version: 2.71 ---------------------------------------- System.Configuration Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.17929 built by: FX45RTMREL ---------------------------------------- DevExpress.Utils.v11.2 Assembly Version: 11.2.7.0 Win32 Version: 2.71 ---------------------------------------- System.Xml Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.17929 built by: FX45RTMREL ---------------------------------------- DevExpress.XtraEditors.v11.2 Assembly Version: 11.2.7.0 Win32 Version: 2.71 ---------------------------------------- DevExpress.Data.v11.2 Assembly Version: 11.2.7.0 Win32 Version: 2.71 ---------------------------------------- DevComponents.DotNetBar2 Assembly Version: 10.0.0.0 Win32 Version: 2.71 ---------------------------------------- Accessibility Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.17929 built by: FX45RTMREL ---------------------------------------- System.Data Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.17929 built by: FX45RTMREL ---------------------------------------- Halo 3 Assembly Version: 1.0.0.0 Win32 Version: 2.71 ---------------------------------------- System.Numerics Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.17929 built by: FX45RTMREL ---------------------------------------- XPG Assembly Version: 1.0.0.0 Win32 Version: 2.71 ---------------------------------------- PackageIO Assembly Version: 0.1.9.2 Win32 Version: 2.71 ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
send me youre drive and ill do it for free even though you said u dont want to but you may mess it up if you dont know what youre doing , if youre uk then its no problem as you can see im a trusted member and willing to help you on your way . just seen this is amonth old nearly ooopss but the offer still satnds if still needed .
wow this whole thing is rightfully confusing your trying to mod gamesavers but dont have gamesaves and your trying to mod a bunch of games at the same time with your editor? if your trying to run homebrew or emulators sad to say you need a jtag or a devkit or i think rgh's can do them too however if you wanna just play burnt games you need to flash your dvd drive and since its a liteon youll need to buy a probe to do it yourself it sounds like your trying to do too much at once figure things out one by one there are tons of helpful tutorials on here that i would watch over anything i find on google focus on modding 1 game at a time for the game save and when that game is done move onto the next game when all the games are done look into flashing your dvd drive it is really easy when you have the right equipment take your time and be cautious do not rush these things lots of people have been doing this for years so you cant try to consume all the knowledge in a short period of time slow and steady wins the race
Well actually I am just modding game saves for now. I was just seeing what was involved with modding the system but I am not in a hurry to do that and I am waiting on that till later. I already modded 2 game saves which was Blue Dragon, and Enchanted Arms but I already been playing those for awhile now and I am mainly just trying to either mod my Conan save or Too Human save or my Condemned 2: Bloodshot save. Just 1 of those saves I need to find out to mod and I will start my next game until I finish it and then I will go to the next one. Condemned 2 was my main one right now I am trying to mod the save but I couldn't figure out the save editor that is in 360Revolution. If someone could tell me what to set everything to on that 1 then I will do it here. Thanks, Badger1975
Well I got a Hex editor that was recommended to me and some instructions on how to hex edit my saves so I am just gonna try this route to edit my saves for now. I am gonna use Hex Workshop Hex Editor (32 bit). Thanks though for everyones help on this topic and if I have any other problems, I will start another topic on that if so. Thanks, Badger1975