Rgh and lt+3.0

hey do you mean Vcs

 

s
I'm sorry but I forgot to say which one do I change power mode or Vcs control ?

sorry for too many posts

 

That's not a problem.

 

Don't change VCS atm, just change power mode. start with 8080

 

well changing the powering mode didn't work I think it is a wire issue

 

please help even after I install the game to the hdd it still freezes

 

hey just in case I found these in some other forums some solutions well Im just asking if it is right to do it because I tried to change power mode and it gave me e 72 error after I got the error I raw flashed again and my Xbox 360s dashboard opened again so I'm just asking if this solution will fix my problem with games- solution:

Does your glitched RGH Falcon Xbox 360 freeze every 15 - 40 minutes in the middle of game play? Have you already tried cooling and getting the temperature low, but to no avail? This is the solution.
You will need one FAT32 formated USB stick, a program called NAND Flasher 360 for XBOX 360 v1.2.0 and 360_Flash_Tool_v0.97.
1. Put the NAND Flasher 360 for XBOX 360 v1.2.0 on your USB stick, start your Xbox 360 and put the USB stick in.
2. Use the File Manager on your Xbox 360 to start NAND Flasher 360 for XBOX 360 v1.2.0 by opening the default.xex file
3. Click Dump NAND to make an backup of your original Xbox 360 NAND to the USB stick
4. After it finishes, shutdown the Xbox and put the USB stick back in your PC
You will need the program called 360_Flash_Tool_v0.97 to open your original NAND and change the SMC values.

5. Open the 360_Flash_Tool_v0.97 application and if it asks, enter the CPU key from your Xbox 360 to continue
6. Click on ... to select and open the orig_nand.bin file from the USB stick (this is your original NAND from your Xbox 360)
7. Click on Tools and select Edit Config.
8. The next screen will show the current values of your Xbox 360 NAND. Click on Edit Config down left to be able to change the values.

The only values you need to change are:
Power Mode should be 8280
Power VCS Control should be 8565
Both ANA Fuse Value should be 03


These are the changes that will make your RGH Falcon not freeze anymore. Thanks goes to the amazing people on the forums who tirelessly tried many solutions until they found what works (none of which are affiliated with this site in any way). This is only a simplified guide for educational purposes based on their findings.

9. When you make the changes to be as the picture above, save the modified NAND as updflash.bin
10. Put the newly created updflash.bin on your USB stick and put it in your Xbox 360
11. Use again the File Manager on your Xbox 360 to start NAND Flasher 360 for XBOX 360 v1.2.0 by opening the default.xex file
12. This time click on Write NAND and choose updflash.bin
13. Wait until the update procedure is finished and shutdown your Xbox 360
That is it! From now on, your RGH Glitched Falcon Xbox 360 will be free of freezing issues (at least from the RGH). You can test it by playing a game without freeze for more than an hour.
Just in case you need them for another Xbox 360:
The possible alternative values for Power Mode can be 8280 or 8380 or 8480
The possible alternative values for Power VCS Control can be 8555 or 8565
The possible alternative values for ANA Fuse Value can be 01 or 03

 

can someone tell me please if my solution is right or wrong

 

can someone please help me

 

just a heads up stop posting and wait for a reply as that will start ****ing people off and you will be ignored.

ill tell you my config for my falcon

Power mode 8480

Power vcs mode 8555

ana fuse value for both is 3

EDIT:
i use jrunner and flash 360 and E72 is usually a bad nand flash

 

that is my pre smc config that is my default well I will try to talk to the guy who rghd my Xbox 360 maybe it's a wiring issue and thanks for
The help guys thanks to everyone who tried to help me I appreciate it

and again I'm sorry for too many posts guys but i have little or no patience well thanks and have a nice day

 

it might be a bad nand sinice you got E72 if you would like to send me two different nand dumps and your cpukey ill build you a donor nand if you do want one send it via pm and that way you will know its clean

 

no thanks t3fury I had a copy of my orig NAND so I flashed it and I putted it in a usb with xenon.elf and xell done the rawflash and then my dash was good

 

Well I contacted the guy who rghd my Xbox 360 he said he will give a file and some instructions that will hopefully fix my problem

 

ok well if you change your mind or need further assistance just let us know