How to Change Nat To Open on Xbox One

​

Spoiler

Step 1:​

We will want to set up a static Ip address for your Xbox one. If you know your routers address then log right in, if not try this.

( Start -> Run -> cmd -> ipconfig)


Your default Gateway will bring you to your router. Most routers default passwords can be found via google.​

​

​

​

​

Spoiler

Step 2:​

Now set up a static Ip address to what ever you would like, It should be under your settings in LAN Setup and save the changes. Make sure to write down what ever one you decide.​

This is mine
​

​

​

​

​

Spoiler

Step 3:​

Now, Go to your port forwarding tab and add these to the list. With the ip address you just set up and save the changes.​

​

Code:
TCP - 53
TCP - 80
TCP - 3074
TCP - 3478-3480
UDP - 53
UDP - 88
UDP - 500
UDP - 3074
UDP - 3544
UDP - 4500

​

​

​

​

Spoiler

Step 4:​

Now go into your admin tab or settings and reboot your router Also Start your Xbox One Up.​

​

​

​

​

Spoiler

Step 5:​

Go to [settings | network | advanced settings | Ip settings | and put in your new static ip​

Test your network connection to make sure it works. And reset your Xbox One for good measure.

You should now have a open Nat on Games!​

​

​

​

Source - Bluetooth

 

Awesome share Xzrts thank you

 

what exactly does this do

 

Open the ports on the router.you can use a program on you pc called port forwarding.

 

It is so annoying that i just bought for my xbox a headset for chat and it's not working (i belive) because i have my NAT on strict. I really hope the program g19smoker mentioned will fix that. If so you have my honest thanks xd

 

Thank you!
but if you have mobile internet at home (idk if you use this in the usa too) there are easier ways to open the NAT
you just open 192.168.1.1 in your browser in your wlan on your pc, look for the proxy settings and change them how it is told to do on your internet providers homepage. it was about 3min work and nomore connection problems