Stumped on ATAPI iHAS324B burner to XGD3

I never used BurnerMax Payload tool to burn XGD3 with my iHas324B drive.
iHas324B can be flashed with out the Payload tool, you don't need to use BurnerMax Payload.

 

put opc on and buffer to the max 1024 and tick the box and have the latest img burn, I do use a ihas my self but these settings work for all xgd3 games m8.

 

Yes, OPC settings help.

Before you do that. Clear your OPC History in Eeprom Utility.

If all else fails. Then try with MKM-003 instead.

 

Use verbs from singapore MKM-003 and if all else fails use payload tool

And you are using it through USB which would be better internally if you ask me as it is sata disk burner

 

close off everything thats running in the background like antivirus and all that nonsense including the internet on your comp and on the i/o setting page 2 move your buffer setting to about mybe 80 - 100 also you might just have a dodgey set of verbs ive had the odd pack in the past that werent great try a diffrent pack but just test 1 chances are the payload tool wouldnt make a diffrence because its burning thats the issue but i guess its always worth a shot if all else fails youl just have to get a new burner not great but should at least burn games without coasters

 

also MKM-001s are rubbish always try and get MKM-003s because you can burn faster plus for me they work better ive never had a pack of 01s for the longest time

 

close off everything thats running in the background like antivirus and all that nonsense including the internet on your comp and on the i/o setting page 2 move your buffer setting to about mybe 80 - 100 also you might just have a dodgey set of verbs ive had the odd pack in the past that werent great try a diffrent pack but just test 1 chances are the payload tool wouldnt make a diffrence because its burning thats the issue but i guess its always worth a shot if all else fails youl just have to get a new burner not great but should at least burn games without coasters


I've been burning discs for over 6 years and never had to shut of antivirus, also I've never used verbs, 100% proven or not!

I've been using ARITA 8x DL and never had a coaster.

From xgd2, truncate and xgd3

Anyone who wants to argue and tell me I'm wrong because verbs are recommended save your breathe.

Once you get the setup right try those discs


Sent from my iPhone without me knowing

 

had this issue with a couple of other ppl. don't use payload tool download this
http://www.mediafire.com/download/cspp4kz3e7ga5b6/Ixtreme_burnermax_firmware_v1.0.rar
unrar it and follow the instructions.should no longer burn coasters. and as for settings every one has there own way of doing things.
mkm 01 and mkm 03 dunt realy matter to be honest get this burnermax firmware installed and it should work fine

 

I actually burned 2 games on a kodak dvd-dl and it works, I was desperate.

Then I tried RiData and Memorex, that also worked!

 

reason i said that was because if there something taking up his memory then its not going to burn proper is it
which by all the things hes tryd and still getting issues its always best to rule every option out.


and op what spandaman said is right about the settings when you get the correct settings sorted thats you good youl never need to change them
also do a bit research on google for diffrences in mk 001s/3s
MKM001 burn at 2.4X MKM003 burn at 2.4X & 4X
so your always best to go for 003s plus you get the odd game that wont work at 2.4 and the odd game that wont work at 4x so always best to have the option of both you should always go for 8X verbs if you want some help regarding setting your img burn up ill be willing to help you if your on skype add me and ill help skype = bhl.peter or if you dont have that just message me on here or send me your msn i can team view you if need be

 

You took my post wrong, if you noticed i put xgd2-truncate-xgd3 in the order it progressed, no one should be truncating anymore

 

my bad i thought by the way you set it out you meant that edited it and yeah would be stupid to lol my bad picked you up wrong there

 

just flash it the payload tool seems to cause bad burns also try to burn in safemode