I'm having serious trouble burning disc 1 of Batman Arkham Origins, disc 2 burnt fine as far as I am aware although I can't install it as there is no option. I had 2 coasters of Battlefield 4 then it burnt fine, but B:AO just does not want to burn properly whatsoever. I'm at a loose end so any help would be sweet IMGBurn settings FHT = On OHT = Off Overspeed = Off Smartburn = On Perform OPC before write = On Burnproof = On 4x MKM-003
I was having the same issue with bao, bf4 and wwe but after 1/2 coasters each it finally burned good .. I'm now using the settings that imgburn prompts you to select
I was having the same issue with bao, bf4 and wwe but after 1/2 coasters each it finally burned good .. I'm now using the settings that imgburn prompts you to select When does it prompt you? Sent from my GT-I9300 using Tapatalk 2
When does it prompt you? Sent from my GT-I9300 using Tapatalk 2 every time I would start burning it asked something about the settings and you could press yes or no
I had the same problem with batman. This is what did for the fix. i deleted the ,dvd file of the iso. thin ran the .iso with abge360 and let it make me a new one. [SIZE=18pt]1) [/SIZE][SIZE=18pt]Turn on Burnermax payload or us Imgburn one when ask.[/SIZE] [SIZE=18pt]2) [/SIZE][SIZE=18pt]Force Hyper tuning- ENABLE[/SIZE] [SIZE=18pt]3) [/SIZE][SIZE=18pt]Online Hyper tuning-ENABLE[/SIZE] [SIZE=18pt]4) [/SIZE][SIZE=18pt]Smart Burn –EANBLE[/SIZE] [SIZE=18pt]5) [/SIZE][SIZE=18pt]OverSpeed-EANBLE[/SIZE] [SIZE=18pt]6) [/SIZE][SIZE=18pt]Clear-PCE every time[/SIZE] [SIZE=18pt] WRITE[/SIZE] [SIZE=18pt]1) [/SIZE][SIZE=18pt]Buffer-512mb[/SIZE] [SIZE=18pt]2) [/SIZE][SIZE=18pt]Burn proof not CHECKED[/SIZE]
I use verbs mk003 with 124b burnermax fw opc - off burn proof - on force ht - on online ht - off smart burn - off overspeed - on pce-never done this read buffer - size 512mb buffer size - 40mb buffer recovery threshold - main 20% and device 40% and try running in safemode burn at 4x and wait 25 mins and they will install 100% to hdd never had a bad rip done 300+
I use verbs mk003 with 124b burnermax fw opc - off burn proof - on force ht - on online ht - off smart burn - off overspeed - on pce-never done this read buffer - size 512mb buffer size - 40mb buffer recovery threshold - main 20% and device 40% and try running in safemode burn at 4x and wait 25 mins and they will install 100% to hdd never had a bad rip done 300+ Yes safe mode here too. Some reason it fails in regular windows. Sent from my GT-I9300 using Tapatalk 2
I'll try safe mode but I read that it has to be some next safe mode setting like network :/ too much hassle atm lmao
I'll try safe mode but I read that it has to be some next safe mode setting like network :/ too much hassle atm lmao I've used normal safe mode (without networking) basically as simple as possible! Sent from my GT-I9300 using Tapatalk 2
Will give it a go tomorrow if I'm bot too hung over Any joy with burning? Sent from my GT-I9300 using Tapatalk 2
I reflashed my burner again and now burn in safe mode, still get the odd coaster but nowhere near as bad
I reflashed my burner again and now burn in safe mode, still get the odd coaster but nowhere near as bad Yeah likewise with me. But generally once I get good burn I try and so all at same time lol Sent from my GT-I9300 using Tapatalk 2
