Ccaveman84's LT+3.0 And ABGX v1.0.6 (FW + Tools) Update/Download Thread - Slim FW Released!

Thanks guys, added all info the the OP

 

Xbox 360 Slim FW In Testing!
Finally progress seems to be being made with the Xbox 360 slim drives as LT+3.0 for slims goes into testing

this is great news for slim owners

Info also added to the OP.

 

Nice update cheers mate will keep an eye on this

 

Xbox 360 Slim FW Released!
Finally LT+ 3.0 comes to slim xbox consoles along with a new JungleFlasher to accommodate it
Dives covered in this update Lite-On 9504/0272, 0225, 0401, 1071 DG-16D4S.

This version adds support for topology data in place of AP2.5 replay data for all XGD3 and AP2.5-active XGD2 backups.

*NOTE: For drives that support AP2.5, all backups containing AP2.5 replay data will need to be patched or re-dumped and re-burned for compatibility with v3.0.

iXtreme LT+ v3.0 for Lite-On Slim retains support for the use of truncated backups, although it it strongly recommended to use full XGD3 burns made with a compatible Lite-On iHAS drive flashed with the iXtreme Burner MAX fw.

In LT+ v3.0, backups remain the same layout, but require new "AP2.5 topology data" in place of the older "AP2.5 replay sector" that was used in LT+ v2.x and older.

Burned backups made for v2.x will not work on v3.0, and vice-versa. In the case of v3.0, the firmware would be looking for nonexistent topology data on a backup burned for v2.x.

For v2.x, the firmware would be looking for nonexistent AP25 replay data on a backup burned for v3.0. Either way will not work, and will flag your 360 by failing AP2.5 challenges outright.

Info and downloads added to the OP.

 

Cheers mate I do my best but it would be allot harder if not for all the help from the other members who have also posted updates and such.

To all those who have lent a hand in keeping this thread up to date, I salute you.

 

More than welcome mate

 

Lol nice one mate I hope you get it sorted

A little tip as some people have had problems with their slim reading games after flashing 3.0
when flashing LT+ 3.0 it has been known to work much better if you disconnect the ribbon cables whilst flashing.

 

Yeah mate its worth trying a
nother member had the same problems recently with their slim

they flashed to LT+ 3.0 and the drive wouldn't read, they then flashed to stock and it was working fine
so they removed the ribbon cable and re flashed with 3.0 and all went well

I have also had the same problem with my own drives as well as a few friends (Phat Consoles)
but once I flashed with the ribbon cable removed I have had no problems.

Hope it helps mate.

 

Thank you I have fixed the link to Jungeflasher
all other links are still working fine.

 

All dead links have been updated.