Post your custom controller!

Discussion in 'Xbox 360 General Discussion' started by Fluttershy, Aug 2, 2012.

  1. JTC

    JTC Beast
    205/282

    lol where can you buy skins and the light for the xbox guide button
     
  2. dave hudson

    dave hudson Botty Destroyer XPG Retired Staff
    0/47

    ebay mate the skin cost me £10-15 dollars to you and the leds cost me £1.50 - about 3 dollars to you ;)
     
  3. JTC

    JTC Beast
    0/47

    i dont know how to take the remote apart and properly put it back together
     
  4. dave hudson

    dave hudson Botty Destroyer XPG Retired Staff
    0/47

    theres loads of guides everywhere mate on how to take your controller apart and also install the led`s ;)
     
  5. zu

    zues14 Newbie
    0/47

    I will be breaking into your house tonight. Please leave some food out.
     
  6. andygee1987

    andygee1987 XPGEE Lifetime Gold
    0/47

  7. ChaseB72

    ChaseB72 The Idiots Are Taking Over
    0/47

  8. wphan

    wphan Newbie
    0/47

    I wish i had a custom controller.
     
  9. li

    lilman6912321 Newbie
    0/47

    i have a question what paint brand of spray paint do u use and how many coats
     
  10. ChaseB72

    ChaseB72 The Idiots Are Taking Over
    0/47

    Hm, my friend used spray paint with two coats...looks good. Two, or one slow, good coat.
     
  11. Fluttershy

    Fluttershy Newbie
    0/47

    Spray in light even coats.....2-3 light coats will be good....DON'T go slow and apply a heavy coat, it won't dry that great, you'll have drips and it'll look horrible. Just be sure to give the controller shell a quick light sanding prior to painting 200-400grit sandpaper is good...I also suggest using a grey primer if you're painting on a black/colored controller...or else it may may show through the paint.

    and spray back and forth in a sweeping motion depressing the can nozzle at the end of each stroke, so you don't get paint build up at the end of your paint stroke


    Brand of paint? I highly suggest using Krylon Fusion paint. or Rustoleum Universal.

    VERY good paint.and only $5-$8 a can(Canadian prices)

    I Also highly suggest using a clear coat on it afterwards, you'll be handling your controller a lot, so to protect the paint from wearing off,use clear coat. For Clear Coat I Suggest Tremclad or Rustoleum.




    [​IMG]



    [​IMG]
     
  12. xi

    xiaxio1 Newbie
    0/47

    Id recommend XL TEAM on eBay I bought an all black 15 mode stealth modded controller from them on eBay for just 80$ well worth it and did I mention the guide button LEDs are blue? :D it's totally worth it look into getting one (67 and 4 in black ops with M14 only) xD
     
  13. wphan

    wphan Newbie
    0/47

    I don't really need a modded controller to do good in cod.
     
  14. draggon5597

    draggon5597 Newbie
    0/47

    mines was a after glow with duel led
     

    Attached Files:

  15. Ninja2012

    Ninja2012 Newbie
    0/47

  16. Ninja2012

    Ninja2012 Newbie
    0/47

    10+ modesplus 60 speeds dual mode auto aim plus more cant remeber the rest
     
  17. ccaveman84

    ccaveman84 XPG Mod Freak XPG Developer
    205/282

    Here's mine! :D
    [​IMG]

    It has been in my family for generations and has been handed down from Caveman to Caveman
    and someday I hope to hand it down to my little Caveboy :LOL:
     
  18. Ninja2012

    Ninja2012 Newbie
    0/47

    never seen anything like that deffo one of a kind caveman
     
  19. xi

    xiaxio1 Newbie
    0/47

    How the hell do you use this black magic controller and press the guide button xD
     

Share This Page