I need some help with burning games using Aone discs

It might just be the discs, when I used to burn games I tried a lot of different discs that were cheaper alternatives to Verbatims and I experienced stuff like you are. But once I used a Verb disc it started to go away and work properly. It could just be faulty discs.

 

Ive had problems with Aone's before so i brough Verbs instead and havent had a single bad burn to date

I no there more exspensive but there totally worth it.

 

I've had friends who have sworn the same, people say they are as good as Verbatims but all I ran into were errors. There is a guy on eBay I said about earlier in another thread called Babz he sells discs really cheap. £1.50 per disc or £7.50(or £8.50) for 10 he also does 20 and 50 stacks. It's better to use them since they are high quality and it's better for the long run. Cheap discs always break or become faulty after a while.

 

Sucks to be you guy's any Dual layer disc burns and works for me perfectly.

 

In img burn turn OPC off now go to eeprom_utility select your drive and go to Eeprom tap click on clear media learn and press yes then go to the options tab tick all boxes and press clear OPC history and press yes then restart your computer/laptop Then burn i use Aones also and that setup works a treat

 

Definately the discs mate. I bought 10 off flea bay, to try em. Only 5 out of 10 worked. Take the above advice, and stick to Verbs.

 

Aone discs burning Tutorial:

1) Make sure you have recent IMGBurn installed
2) Turn OPC ON in IMGBurn. Write-Perform OPC before Write
3) Make sure that you have MAXFW on your IHAS but do NOT change anything and change the FW to work with different media.
4) Make sure you have Layerbreak as CALCULATE OPTIMAL
5) Make sure to burn on 2.4x and have no programs running in the background and only IMGBurn

I use Aones and Verbs and have no trouble at all burning with either media.

Hope this helps you

 

they do work but not for xgd3s the amount you waste with coasters makes it cheaper buying verbs just spend the extra money

 

Aones do work for XGD3's Pete ive been using them for a while and had no problems.

 

ive had big problems with them type of discs i wont use them anymore the last time i had some was when pgr 4 came out and i had to burn it 5 times... i use verbs or datatwrite reds now (verbs for xgd3 datawrite reds for xgd2)

 

Well you must be doing something wrong then if XGD2 games aint burning right with aones and it depends if your using a IHAS drive or not

 

Which is the Disc ID of Aone discs?
Here I only use the IDs Umediscs, Ricohjpn and Mkm
Umediscs and Ricoh is the ones that works best, ricoh fail from time to time.

Is it burning XGD2 games at least? Aren't the discs scratched?

 

Aone Disc ID: RICOH

The thing is what people have gotta understand is yeah verbatims are the best media to burn on especially for XGD3 but if you have the right settings and follow the procedure you shouldnt have any problem burning with a IHAS 124B Drive with MAXFW on it.


If you are using any other drive than a IHAS your gonna have problems with XGD3. XGD2 should be fine

 

I use nothing but Aones for my games XGD2 and XGD3.

Use these settings

Burn settings with Ihas
Write speed 4x or 2.4x
OPC unticked ( but you could try both because mine WAS ticked and worked)
Force Hyper Tuning Enable
Online Hyper Tuning Enable
OVERSPEED Disable
SmartBurn Enable
Layerbreak Calculate optimum

I use these settings for all my games