So the other day my xbox got the dreaded 1 red ring... aka e74 After looking at a few tuts i reflowed it yesterday with a heat gun But no it comes up with 3 red lights and the fan wont even spin now? I gave it a re-paste aswell but still no luck? Any1 got any idea's what the problem could be? The secondary error code is 0230
all you have to do is do the pennie trick there"s 4 chips that you need to put em on and it should be good there dude
just afew notes : too much paste is just as bad as no paste be sure the board is not flexed , especially when you are heating it up let the board cool all the way down before you try to reboot it make sure not to over tighten the bolts on the heat sinks last but not least - if all else fails , set that peach a blaze !