The new Xecuter J-R programmer has been created to cater to the budget conscious and coded to work hand in hand with the latest version of the J-Runner app. A third of the size of the Xecuter NAND-X and optimized to run faster than any other USB-SPI based tool (other brands run at 50% of NAND-X speed, the J-R runs at 80%), this nifty tool can fully read/write NAND over SPI and can also program the Xilinx CoolRunner Dev Boards over USB ! Complete with a CoolRunner JTAG cable so you simply plug 'n program without any soldering using the latest J-Runner App (needs to be at least Build 268). Also comes with NAND installation wires that have the connectors that are compatible with the NAND-X QSB boards. If you don't use the QSB's you can simply cut off the connectors and do a normal wires only install. The J-R programmer is also fully upgradeable and can be programmed using the Xecuter X360USB PRO Update app. Onboard LED's indicate Power and BootLoader mode. RED LED: Bootloader Mode (Switch to the left) GREEN LED: J-R Programmer Mode (Switch to the right) Features: Fast NAND Programming Fast XILINX CoolRunner JTAG Programming Compatible with both Phat and Slim Onboard LED's indicate Power & Data Easy Install System Compatible with All NAND-X QSB's Includes Cable For QSB or Wires Install (QSB Sold Separately) Includes Cable For Xilinx CoolRunner JTAG Includes KIOSK option for Remote Reset Built-in Programmer For Future Firmware Upgrades Designed for the latest J-Runner App (Build 270+) Rock Solid Design – Tested by the J-Runner Team Supports New CoolRunner/NAND-X QSB Kits (Solder Separately) Affordable – We Provide You With More For Less ! High Quality & Trusted Xecuter Design What's In The Kit: J-R Programmer NAND Cable Set (Can fit to optional QSB or cut use as wires install) CoolRunner JTAG Cable Set Download: Latest J-Runner Windows Drivers Update App On sale from May 1st at all good Xecuter stockists only $24.95 Source : team-xecuter.com