I was flashing my disk drive it is a lite on when i was in the step where you have to turn on and off the connectivity kit i couldn't do it then i had to work and now i have to start over and my disk drive is not being read the x360 usb and the ck3 mini is not popping up i will put the device manager screen shot up
I was flashing my disk drive it is a lite on when i was in the step where you have to turn on and off the connectivity kit i couldn't do it then i had to work and now i have to start over and my disk drive is not being read the x360 usb and the ck3 mini is not popping up i will put the device manager screen shot up does the usb pro show up in jungleflasher? and do u have the key.bin for the drive? which lite on 2.4 or 5?
it does not pop up on jungleflasher i tried on a windows vista, a windows 7, and a windows 8 all give me the same problem. only wokred once before i had to go to work and had to start over then never connected after that. and im not sure if i have 2.4 or 5
i also have an unbricked drive and it doesn't read it either maybe cause the x360 pro usb and the ck3 are not being connected
it may just be in vender mode that may be why its not reading ur drive can u open the drive via the ck3?
it does not pop up on jungleflasher i tried on a windows vista, a windows 7, and a windows 8 all give me the same problem. only wokred once before i had to go to work and had to start over then never connected after that. and im not sure if i have 2.4 or 5 what the drive doesnt show up or usbpro because hook it all up put firmware in and key on first tab then click on third tab and hit lite on erase only erase if u have your drive key.bin
The disk drive does not respond to anything it doesn't have the red light that used to turn on and will not open its like power less
Just proceed to write to the drive with your F/W already loaded in Jungle Flasher, you haven't bricked it so don't worry.
I know its correct cause it was working before until i disconnected it and connected it back when i came from work. the ck3 lights up the probe lights up and the x360 pro has one green light and a red one on
yea ur fine just do like addz said I thought I did that when i did my first lite-on m8 and it proberly does look for some where it says vender mode it should say on the dvdkey tab
Do i click yes? I know its the correct one cause this is the obly on i did it with yes m8 just follow the instructions after you click yes on erase it will ask twice make sure u read wat it says m8