Doubts about RGH and glitch chips

Discussion in 'Jtag & RGH Discussion' started by fan178, Aug 3, 2014.

  1. fan178

    fan178 Newbie
    55/94

    I already have a RGH but i want to try to do it my self since the one i have is premade, Im looking to buy a trinity or corona(early ones) and I'd like to know what thing do I need to buy in order to be able to do this? Thanks in advance!
     
  2. DistinctiveModz

    DistinctiveModz Banned (Read The Rules)
    0/47

    Well with trinities most people would go with the coolrunner rev c because it has stable boot times without tuning. On coronas I personally don't use TX products on those, instead I use the Stone DGX or x360 ACE. With those chips I get instant boots most of the time. The stone DGX also works with the trinity and boots instant all the time. Ill link you to some videos i made with the console botting with those chips!

    Trinity (StoneDGX) - https://www.youtube.com/watch?v=mthsb55caRA&list=UU_vQcZ4PTJq5MFJMYEbUp1g

    Corona v3 (x360 ACE) - https://www.youtube.com/watch?v=M1CIE-5nIdQ&list=UU_vQcZ4PTJq5MFJMYEbUp1g
     
  3. Tony B

    Tony B Ťサ∑ ㄕ◊к∑㎡◊и Lifetime Gold
    185/188

    Listen to this guy :p
     
  4. fan178

    fan178 Newbie
    0/47

    Other than the glitch chips everything else is software? I dont need any cables or anything? Sorry for such noob questions lol
     
  5. DistinctiveModz

    DistinctiveModz Banned (Read The Rules)
    0/47

    Well you need a nand reader to read the nand in order to write the hacked image to the console, besides that you dont need anything else. I am assuming that you do have a soldering iron and some good soldering skills.
     
  6. fan178

    fan178 Newbie
    0/47

    Yeah I'm actually leaving the soldering part to a friend which works on these kinds of things on a daily basis :D
     
  7. Tony B

    Tony B Ťサ∑ ㄕ◊к∑㎡◊и Lifetime Gold
    185/188

    No, you'll need more than the chip. You're gonna need a JR Programmer/nand-x to read/write the nand. Other than that, the rest is just software.
     
  8. fan178

    fan178 Newbie
    0/47

    Awesome! Im excited to order the chips! Where do you guys recomend i buy? Could you link me? It would be gread :D
     
  9. Tony B

    Tony B Ťサ∑ ㄕ◊к∑㎡◊и Lifetime Gold
    185/188

    Where are you located?
     
  10. fan178

    fan178 Newbie
    0/47

    US
     
  11. Tony B

    Tony B Ťサ∑ ㄕ◊к∑㎡◊и Lifetime Gold
    185/188

  12. DistinctiveModz

    DistinctiveModz Banned (Read The Rules)
    0/47

    If your on a budget i suggest you buy a Super Nand Flasher, Its essentially a clone of the nand-x It works just the same, it reads the nand in 2.03 seconds and works great. I personally use a JR-Programmer v2 but there hard to find most places are sold out.
     
  13. fan178

    fan178 Newbie
    0/47

    I cant seem to find the stone dgx! I'd like to have a trinity that instantly turns on! not have to wait for the glitch chip!
     
  14. DistinctiveModz

    DistinctiveModz Banned (Read The Rules)
    0/47

  15. Tony B

    Tony B Ťサ∑ ㄕ◊к∑㎡◊и Lifetime Gold
    185/188

    What are you saying? That your retail trinity boots instantly?
     
  16. DistinctiveModz

    DistinctiveModz Banned (Read The Rules)
    0/47

    LOL It does sound like that :lmfao:
     
  17. fan178

    fan178 Newbie
    0/47

    I'm saying i'd like to have a trinity which boots up instantly, and not have to wait(like mine) for it to boot up!
     
  18. apollo3841

    apollo3841 UK JTAG/RGH Suppler ッ Lifetime Gold
    55/94

    If this is your first time, I would strongly suggest getting a old console on dash kernel 14699 or below. that console will be rgh 1 able witch will have a instant glitch and is very easy to install with the coolrunner rev c, when messing around with rgh 2 things get tricky and not always can you get it to instant glitch. what I am saying is you need to be experienced or do a lot of research. good luck!
     

Share This Page