A Few Tips When Using A JTAG

** THIS TUTORIAL USES A FEW OLDER METHODS NEW ONES EXIST **




Extracting ISO's and putting them on your console

Spoiler

So lets begin:

Requirements:

-The ISO of the game you want: Rip it yourself
-A method of transferring the Xbox game from your computer to you Xbox -a USB HDD 8GB+ (formatted at Fat-32)
-XboxImageBrowser:
-XEXmenu installed on your JTAG

First you need to open the XboxImageBrowser and locate the A ISO you downloaded or ripped (GOOGLE)



Now you will see the contents of the ISO (below), Right click the main file and click extract and extract the contents onto a 8GB or more HDD or USB drive (must be formatted to Fat32)




Once the contents has been extracted to your USB HDD you want to plug it into your xbox 360 and load up XEX menu




Once XEXMenu has loaded up press RB once to move over to the Xbox HDD file system then hit X and select USB0: (This is if you only have one USB device connetced)



Now locate the folder your extracted ModernWarfare2 Game is in and hit Y on it and select copy

Now hit X again and move back to HDD1:



Now hit Y again and select create and make a new directory called Games



Now go into this directory by selecting it and pressing A and then hitting Y again and selecting Paste (may take a few mins)



Now we must patch the .XEX files so go into the extracted files we just pasted and go down to default.xex and press Y on it and select PatchXex



Now the game is on your Xbox HDD and patched, next time you load up XEXmenu your game should have been detected and will be waiting for you to play.

This is a old method but it still works, most ISO's come pre patched now

How to install DLC on your console

Hello, we will be installing the Modern Warfare 2 stimulus package on a jtag xbox 360. this will work for all DLC what has been downloaded from another XBL account.
It envolves transferring a license from your XBL account on the Jtag to the DLC (has different license) *your Jtag will need an XBL account on it but will NOT need to go on XBL just make sure it is unplugged when you sign in*

So lets get started!

Requirements:

A HEX editor:
YarisSwap:
DLC patcher:
The DLC you want: get it off a friend or use google
DLC you downloaded on your own XBL account (can be free)
A Jtaged xbox
The latest TU for the game your DLC is for (found in cache folder on xbox HDD (if game has the update))

Retrieving our license key

First off you want to open DLCPatcher.exe and click open file and locate the DLC what you own.



on the second line down you will see some numbers and letters (i hid half of mine). That is your license, its tied to your XBL account and the DLC needs that licence to work on your account so make a note of this as you will need it later.

Getting the DLC ready to put your key into

Now you need to Yaris Swap the DLC before you put your key into it, This may already be done if you downloaded it from the internet,

Now we need to get our DLC to look like like that so if it already does you can move onto the next spoiler, if it doesn't keep reading.

Open up YarisSwap.exe and locate the DLC you want,



Then hit the "Hex mod - Yaris Swap" button (its hard to miss)




How to Hex in your own license

Now we have to enter our own license what we found earlier into the DLC we want.
To do this we need to open our DLC in a hex editor



Now use Ctrl+F to start a search and key in:


ff ff ff ff ff ff ff ff
make sure type is selected as Hex!




When you click find you should see something like this:
The parts of the HEX are color coded with the parts you saw in the DLC Patcher.



What you now want to do is replace the RED and YELLOWFFFFFFFF's with your license.
For example, if ,my license was a1 00 00 2e 9d 4e 00 e1 it would look like this:



Then you will click save and it should save within a couple of seconds.

Now, once you have successfully saved the file, if you open it up in DLC Patcher again you should see something like this where a100002e9d4e00e1 would be your license:



Putting the DLC on your console (Transfer cable method)

First off you want to load xPort 360, select your hdd and navigate to Partition 3> Content> 0000000000000000>



Now you need to copy the folder (correctly sorted and named (Should be but if not grab XBox Live DLC sorter, run it, select the location of the DLC and it will correctly make the directory and names the DLC needs, you just have to copy the folder inside the Sorted folder to 000000000000000 on the Xbox HDD




Now you have the DLC on the HDD, you need to put the TU on the HDD with the game, Im not 100% sure where to get them from and where to put them for other games but for MW2 you need to place the Patch_mp.ff and the default_mp.xex into the extracted MW2 on your HDD

Then you should be done!