Just recently I had turned my rgh on and I wanted to select a trainer for gtav.. while in freestyle dash I pushed the xbox guide button when I found that I didn't have the option for system link or have the my files or the cpu heat and all the degrees on the bottom oof the guide.. anybody ever have this problem ? If so how could I fix this ? Any help is appreciated
What all files do I need to delete there are 4 folders in freestyle once I click on it in xex menu then there are 5 paper like files
Try my old tutorial on seting up link on FSD http://www.xpgamesaves.com/topic/56369-tutorial-setup-and-install-new-fsd-3-0-rev402-with-link/
Had this problem and your old one helped me out before thanks. Good luck bud hopefully it works for you.
I did a fresh install of fsd on my rgh. After that I went ahead and installed a new version of dashlaunch 3.12 I was on 3.10 before.. all the settings are the same except I had to change the boot into option.to go to fsd.. I clicked my xbox guide and It was the stock nxe guide not showing files or system link.. so just Uninstaller fsd again and folow the tUT you had posTed on here and that should make it show return to freestyle and system link and the file option ?
But dashlaunch isn't my issue it's all in fsd.. my xbox guide button works fine but when I push it it is showing the stock nxe guide not the one I had before with fsd showing all the heat of my cpu case heat and all that jazzy stuff.. so that's what trying to find help with It saysays return to xbox home when it should say return to freestyle
Setup link if its still doing the same you still have old FSD on the console or your using a old FSD.
I'm just merely advising you the program 'Dashlaunch' has been updated to 3.14 and recommended for any RGH/J-TAG user. Yes, that is correct very latest version it can be.
I also have this problem , i am on the latest dash launch and the latest FSD. If i ever find a fix for this i will let you know, make sure you let me know if you find one.
[Paths] BUT_A = BUT_B = BUT_X = BUT_Y = Start = Back = LBump = RThumb = LThumb = ; Default is what loads when you hold no buttons ; leave this blank if you want NXE as default Default = Hdd:\FreeStyle\default.xex ; at boot time, default can be overridden based on how the console is turned on ; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default ; note that the Guide item is ALWAYS overridden by option: remotenxe = true Guide = ; if you power on with the button on the front of the console (or the power button on a remote if remotenxe is not set to true) ; this item will be used instead of default Power = Hdd:\FreeStyle\default.xex ; if set, going to system settings from HUD will run this app, override with Right Bumper Configapp = ; if set, this will be run as a title before any other option occurs, does not get circumvented by held buttons or default ; guide/power opts are processed after this; intended for a short video player to allow replacing bootanim Fakeanim = ; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped ; as text to a file. Same path restraints as the quick launch buttons. ; if exchandler is set to false, this option does nothing. ; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device ; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only ; checked on boot, so the device must be present at power on and at crash time for this to be effective ; ie: dumpfile = Usb:\crashlog.txt Dumpfile = If you both are able to get your launch.ini file from FTP, make sure the top half looks like this so it will boot directly into FSD. Depending on the location of FSD it will most likely different to mine, as long as the top half of the launch.ini looks like this. Also in FSD make sure you've not unloaded the plugin or you will have a stock NXE also, and some trainers will boot you to stock NXE and as long you've got the FSD plugin running you can get back to FSD using the guide button. I will be making a TUT sometime this week with the default settings for launch.ini for people to copy.
There you go better code for launch.ini Just add your plugins Don't forget to say thanks to Feral for cleaning it up.
