E79 Slim RGH

Discussion in 'Jtag & RGH Resolved Issues' started by X9Cinema, Apr 16, 2013.

  1. X9Cinema

    X9Cinema Resident GFX Guru Lifetime Gold
    0/47

    Hello, I've been experiencing freezing and the screen will get fuzzy on boot up recently, and it never makes it to fsd or dash, and then today I go to play, and it froze like usual, so I turned it off and re-booted it, and it gave me one red light and a E79 error, so I've tried unplugging all of my stuff, and then replugging the cords back in and booting, that didn't work so my question is this a simple fix, or a hard fix and how do I fix it?​
     
  2. sensi420

    sensi420 Contributor TeamXPG
    205/282

    try booting without your hdd
    E79 is a bad hdd or bad hdd connection
     
  3. X9Cinema

    X9Cinema Resident GFX Guru Lifetime Gold
    0/47

    Okay it now doesn't give me that error, but it still freezes.
     
  4. X9Cinema

    X9Cinema Resident GFX Guru Lifetime Gold
    0/47

    It's been doing this for about two weeks, I once pulled it out and put it in a very open space, and put a fan on it and it worked for about an hour.
     
  5. XPGCaboose

    XPGCaboose XPG Lifer TeamXPG
    155/188

    sounds like you are going to need a reflow or at the very least rrod fix. if your screen was getting pixelated it's on it's way to rrod.
     
  6. X9Cinema

    X9Cinema Resident GFX Guru Lifetime Gold
    0/47

    Hmm I see, can I do any of those at home?
     
  7. jayt180703

    jayt180703 i think ive broke it
    0/47

    yes mate buy a rrod repair kit and some decent silver past i reccomend artic mx2 ..
     
  8. X9Cinema

    X9Cinema Resident GFX Guru Lifetime Gold
    0/47

    Will the TX kit work on a slim?
     
  9. jayt180703

    jayt180703 i think ive broke it
    0/47

    should do mate but i never use any of that stuff just a torx that fits and belive it or not a small kitchen knife to undo the clips .
     
  10. X9Cinema

    X9Cinema Resident GFX Guru Lifetime Gold
    0/47

    No no I have the tools, they make a RROD repair kit, I was wondering if it was the one you were referring to?
     
  11. jayt180703

    jayt180703 i think ive broke it
    0/47

    oh i see lol i wouldnt know mate id just buy a decent kit from a site or get the nessecary nylon/metal washers and screws and use some decent silver paste i never use a paste thats supplied with a kit as i find it never works .
     
  12. X9Cinema

    X9Cinema Resident GFX Guru Lifetime Gold
    0/47

    I see, I'm kinda lost on what I need, are the parts for the slim the same as the phat consoles?
     
  13. jayt180703

    jayt180703 i think ive broke it
    0/47

    yes thats what ive been using all seem to work the same at the end of the day all where doing is clamping it down .
     
  14. X9Cinema

    X9Cinema Resident GFX Guru Lifetime Gold
    0/47

    I guess I'll give this a go and report back later.
     
  15. jayt180703

    jayt180703 i think ive broke it
    0/47

    best of luck mate .
     

Share This Page