3 Red Lights Error

Discussion in 'Xbox 360 Support' started by jsja, Jun 24, 2013.

  1. jsja

    jsja The Beast
    0/47

    is there a permanant rrod fix. my cousins xbox keeps doing it. sometimes it works. it was given to him. it was flashed to. i think it had thermo paste on it before also. not sure. its an old xbox.

    EDIT: code is 4142 or some say the four rings is 0 so it would be 0102
     
  2. xpghax

    xpghax Gold Section Mod/Uploader
    205/282

    Whats the secondary error code?
     
  3. jsja

    jsja The Beast
    0/47

    sorry added to first post
     
  4. xpghax

    xpghax Gold Section Mod/Uploader
    205/282

    Have u tried the xclamp fix on it,0102 is over heating,make sure u use decent thermal paste,like arctic silver, on it.
     
  5. jsja

    jsja The Beast
    0/47

    i think that was already done when given to him. it might be the paste thing. i took the box apart but stuck at the remove power part (the board under the part that turns the xbox on). i need to remove the 3 screws but need a Torx T8 Screwdriver. i live in the US so i hope i can find a Torx T8 Screwdriver & arctic silver thermal paste in a store by me
     
  6. sensi420

    sensi420 Contributor TeamXPG
    205/282

    Radioshack carries thermal paste and they also have torx sets
     
  7. X9Cinema

    X9Cinema Resident GFX Guru Lifetime Gold
    0/47

    Yeah as sensi said, radio shack has those items, I got a two pack of artic silver at RS, it was the smallest size they had, and for the torx set, you might be better off going to a auto parts store, as they might sell just a T8! ;)
     
  8. jsja

    jsja The Beast
    0/47

    ok thx guys. radio shack had both paste & torx. what now? remember im sure this was done already but maybe wrong paste. plus the xbox does work at times. is there a vid to watch or what? how much paste? how long after I put it on can I turn the box on? lots of questions as I never did this before
     
  9. setsae

    setsae " the one & only "
    0/47


    /iwave JSJA
     
  10. jsja

    jsja The Beast
    0/47

    thx for the vid but I thought I had to do the paste to those 4 pads on bottom of the motherboard. guess not. lol

    those pads were practically falling off
     
  11. X9Cinema

    X9Cinema Resident GFX Guru Lifetime Gold
    0/47

    Nope just under the heat sinks, hope all worked out, please give us a status report! ;)
     
  12. jsja

    jsja The Beast
    0/47

    thx guys. everything seems to be ok now
     

Share This Page