Thanks for this great program but I cannot connect it to my xbox 360 slim! I tried many times but updsvr_standalone_v1 says no connection though I can connect to my jtag through FileZilla, is not there any manual method if I have the nand on my computer? Another Q when I check the nand I get those bad blocks UnHidden Content: • Bad Block ID @ 0x17F [Offset: 0x62BE00] • Bad Block ID @ 0x282 [Offset: 0xA58400] • Bad Block ID @ 0x2E3 [Offset: 0xBE8600] • Bad Block ID @ 0x33B [Offset: 0xD53600] • Bad Block ID @ 0x34E [Offset: 0xDA1C00] • Bad Block ID @ 0x17F Found @ 0x3FF[Offset: 0x107BE00] • Bad Block ID @ 0x282 Found @ 0x3FE[Offset: 0x1077C00] • Bad Block ID @ 0x2E3 Found @ 0x3FD[Offset: 0x1073A00] • Bad Block ID @ 0x33B Found @ 0x3FC[Offset: 0x106F800] • Bad Block ID @ 0x34E Found @ 0x3FB[Offset: 0x106B600] Is it okay?
If you cant get this program to connect you could try using xebuild GUI or JRunner to build your nand on your PC then flash from usb using xell. Bad blocks are common and does not mean the image is bad in any way, best bet is to start with either the original nand from the console or dump the current nand and build a new one with that. XeBuild GUI: http://www.xpgamesaves.com/topic/132905-xebuild-17489-release/ J-Runner: http://www.xpgamesaves.com/topic/132906-jrunner-dash-17489/