I am going to put this out in here in hope someone can help me. I have now figured out through trial and error and wasting over 8 disks as coasters if not more MKM-001s verbs that the only games that were able to burn were XGD2 games and the XGD3 games have not yet worked yet not even once. I tried ADDZ and J4Ys settings with abgx and img burn and others with no avail. I am using BurnerMaxs Payload Tool which is enabled and abgx and imgburn. This was a internal burner but was put in a external case I got it off ebay awhile back. Any Help would be appreciated. )) Thanks XPG
I never used BurnerMax Payload tool to burn XGD3 with my iHas324B drive. iHas324B can be flashed with out the Payload tool, you don't need to use BurnerMax Payload.
put opc on and buffer to the max 1024 and tick the box and have the latest img burn, I do use a ihas my self but these settings work for all xgd3 games m8.
Yes, OPC settings help. Before you do that. Clear your OPC History in Eeprom Utility. If all else fails. Then try with MKM-003 instead.
Use verbs from singapore MKM-003 and if all else fails use payload tool And you are using it through USB which would be better internally if you ask me as it is sata disk burner
I am using the verbs from singapore MKM-001 went through freaking 8 or 9 coasters now. Thanks for the advice and info I will look at the settings for image burn but do believe it was same as ADDZ and J4Y had. IT just sucks it was a waste of 20 disks if the mkm-001 do not work but i will try the mkm-003 if all this fails.
I agree it was a good buy as i think the settings are just wrong. Imagine taking a external xgd3 burner plus external; 2 tb hard drive everywhere I go.. sounds to good to be true eh : D
close off everything thats running in the background like antivirus and all that nonsense including the internet on your comp and on the i/o setting page 2 move your buffer setting to about mybe 80 - 100 also you might just have a dodgey set of verbs ive had the odd pack in the past that werent great try a diffrent pack but just test 1 chances are the payload tool wouldnt make a diffrence because its burning thats the issue but i guess its always worth a shot if all else fails youl just have to get a new burner not great but should at least burn games without coasters
also MKM-001s are rubbish always try and get MKM-003s because you can burn faster plus for me they work better ive never had a pack of 01s for the longest time
close off everything thats running in the background like antivirus and all that nonsense including the internet on your comp and on the i/o setting page 2 move your buffer setting to about mybe 80 - 100 also you might just have a dodgey set of verbs ive had the odd pack in the past that werent great try a diffrent pack but just test 1 chances are the payload tool wouldnt make a diffrence because its burning thats the issue but i guess its always worth a shot if all else fails youl just have to get a new burner not great but should at least burn games without coasters I've been burning discs for over 6 years and never had to shut of antivirus, also I've never used verbs, 100% proven or not! I've been using ARITA 8x DL and never had a coaster. From xgd2, truncate and xgd3 Anyone who wants to argue and tell me I'm wrong because verbs are recommended save your breathe. Once you get the setup right try those discs Sent from my iPhone without me knowing
had this issue with a couple of other ppl. don't use payload tool download this http://www.mediafire.com/download/cspp4kz3e7ga5b6/Ixtreme_burnermax_firmware_v1.0.rar unrar it and follow the instructions.should no longer burn coasters. and as for settings every one has there own way of doing things. mkm 01 and mkm 03 dunt realy matter to be honest get this burnermax firmware installed and it should work fine
Thanks for all the info, I researched what i thought before choosing mkm 001 over mkm 003 but that just may be it or just a bad pack i will try all of these ideas tonight/tomorrow and keep u updated thanks for ur support
I actually burned 2 games on a kodak dvd-dl and it works, I was desperate. Then I tried RiData and Memorex, that also worked!
xpgoe85 and spandaman plus rep i will wait till these run out try the 003 if not then that then - say throw away burner g19 opc on plus rep wise lyrics cleared opc history in eeprom utility buffer max 1024 plus rep thanks pistol pete on buffer and advice on mkms plus rep scunny payload tool works fine it says enabled with that extra amount of space do not think that is the problem plus rep Thanks Addz and J4y for the settings.. thank you so much for everyone willing to help me out. I never messed with the buffer before I am thinking that is the problem will try right now and hope to say. thanks it all works
In looking at this error and being a buffer problem and tried both of what everyone said for settings this tells me my computer is just a peice of Fecal Leaking nothing is running . besides this. I am sure I will get the laughs when you see computer spec of old windows xp. I will try it on another computer and hope for the best. Thanks again for everyone helping I am assuming there is no way around this now except trying a different machine. Intel Pentium 4 CPU 2.80ghz 2.79 Ghz, 2.99 GB of Ram virtual alloc failed reason: not enough storage is available to process this command failed to initialise FIFO Buffer (1,073,741,824 bytes)
reason i said that was because if there something taking up his memory then its not going to burn proper is it which by all the things hes tryd and still getting issues its always best to rule every option out. and op what spandaman said is right about the settings when you get the correct settings sorted thats you good youl never need to change them also do a bit research on google for diffrences in mk 001s/3s MKM001 burn at 2.4X MKM003 burn at 2.4X & 4X so your always best to go for 003s plus you get the odd game that wont work at 2.4 and the odd game that wont work at 4x so always best to have the option of both you should always go for 8X verbs if you want some help regarding setting your img burn up ill be willing to help you if your on skype add me and ill help skype = bhl.peter or if you dont have that just message me on here or send me your msn i can team view you if need be
You took my post wrong, if you noticed i put xgd2-truncate-xgd3 in the order it progressed, no one should be truncating anymore
my bad i thought by the way you set it out you meant that edited it and yeah would be stupid to lol my bad picked you up wrong there
