Hi guys I could really use some of your insight with my 360. If you have the time please look at what I got I'm on the final steps of the R-jtag install but I can't get the rater to connect to it and the 360 isn't outputting video. Rater shows "waiting for POST to change" every time I run it. This is my first time and I have no idea what it's doing now :? Video of it's current behavior: [youtube]http://www.youtube.com/watch?v=lerWEvCDWBY[/youtube] Pictures of qsbs Xell loaded up and I was even able to get the cpu key: I really appreciate any assistance you can provide! Or recommend someone I can send it to for repairs, thank you
is that a trace repair on stby_clk? the rjtag doesn't need the stby_clk soldered because it doesn't use it. i would recommend using some flux and touching up all points. If you don't do all make sure you atleast do the post qsb & the jtag alt v2 qsb. do you have a multimeter?
Hi Gameroms thanks for the reply. I did have the stby_clk soldered but removed it along with the resistor But I bought a few 33olm resistors on ebay and I was able to connect the new one in place. I did remelt the solder on the qsbs. It works as I was able to read the nand and even get the cpu key from my tv. So I don't know what went wrong... I would really rather send it to a pro to take a look at it if you know anyone in the US?
