PS4 performs worse than PS3 as a Blu-ray & DVD Player

Discussion in 'Articles' started by Bullet, Dec 18, 2013.

PS4 performs worse than PS3 as a Blu-ray & DVD Player

Bullet Dec 18, 2013

  1. Bullet

    Bullet XPG Original Founder EST 2000 XPG Administrator XPG Founder
    0/47

    Joined:
    Jul 16, 2009
    Messages:
    20,982
    Likes Received:
    7,956
    Trophy Points:
    550
    Gender:
    Male
    Console:
    Xbox
    HDTVTest have run some tests on PlayStation 4's media playback features, and found out that the new console performs worse than the PlayStation 3 as a Blu-ray and a DVD Player.

    Here are the results of the test:

    • Blu-ray Playback

    Unlike the Xbox One, the PS4 happily played back our recordable Blu-ray Discs containing our custom test patterns. BD-R playback isn’t a killer issue for most people who are only watching store-bought movies on factory-pressed discs, but blocking it is such a comparatively useless anti-piracy measure that we wonder why Microsoft bothered.

    In any case, we were effortlessly able to confirm top-notch, totally accurate, unadulterated playback of Blu-ray movies against several other known-good reference players. That’s a small advantage over the Xbox One’s very good Blu-ray playback, which has a small (but generally not noticeable) lightness inaccuracy in its output.

    There’s no noise reduction or other unwanted processing, no loss of resolution in the luma (brightness) or obvious loss of resolution in the chroma (colour) channel, pixel cropping, chroma upsampling jaggies, or other nasties to spoil the party with 24p content, which accounts for the majority of footage on Blu-ray. With 24p content, you provide the disc, the PS4 dutifully reproduces it. This alone will be enough to make the Sony PlayStation 4 a very usable BD player for most gamers.

    That’s the end of the good news, however. If you play 1080i content on the PS4, you’ll find that the system deinterlaces it, and does a poor job of it. There doesn’t seem to be any semi-advanced motion-adaptive deinterlacing on the PS4 at all, with the entire screen (and not just the moving areas) being deinterlaced with a fairly crude algorithm. Visually, that translates into fine details flickering slightly. Of course, it’s more obvious in test charts than it is in content, but the resolution is being lost either way.

    Nearly all films are stored at 24p so don’t count on seeing any issues with those, but if you play a video-based concert or documentary on the machine, you’ll be getting lessened vertical resolution compared to what you’d get from a better Blu-ray player such as the PS3, or nearly any standalone player.

    Don’t think about setting the output to 1080i to send 1080i discs out in their native format, either: this compounds the problem. Even with the output set to 1080i, all 1080i content is deinterlaced internally and then output. There’s no native path for 1080i Blu-ray content on the PS4 (yet?), everything goes through the sub-par 1080p conversion process.

    The diagonal interpolation test (which tests for a player’s ability to smooth jaggies during interlace to progressive conversion) didn’t return good results either, with jaggies being obvious on steep angles.

    Unsurprisingly with all of this in mind, there is no provision made for film mode deinterlacing (detecting the presence of film content stored in an interlaced signal). Just so it’s clear, here are the tests from the 60hz tests on the Spears & Munsil disc:

    • 2-2 (30fps inside 60i): Fail
    • 2-2-2-4: Fail
    • 2-3-2-3 PF-T (24fps inside 60i with MPEG metadata): Fail
    • 2-3-2-3 (24fps inside 60i): Fail
    • 2-3-2-3: Fail
    • 2-3-3-2: Fail
    • 3-2-3-2-2: Fail
    • 5-5: Fail
    • 6-4: Fail
    • 8-7-8-7: Fail
    • Time-adjusted: Fail

    Likewise, for European users watching European content (BBC TV shows are an obvious example), it’s worth knowing that the Blu-ray format does not have provision for 25p, so all of this content is encoded at 50i, and accordingly falls foul of the PS4's lack of deinterlacing capabilities. With 1080i HD content, this is actually not a gigantic problem, and we imagine most users won’t notice owed to the high HD resolution masking the resolution loss. It’s still poorer quality than many standalone players, however.

    It’s a strange decision on Sony’s part, because when first launched, the PS3 system simply output 1080i content as 1080i (natively), meaning that the other components in the user’s AV system (AV receiver or TV) would do the deinterlacing. We’d hope this is something Sony addresses with a system update – either give us good deinterlacing with film mode detection, or just output the 1080i content as pure 1080i and let another device that has the same capabilities take care of it.

    • DVD Playback

    The PS4's lack of deinterlacing prowess is a much bigger problem in the standard definition realm, where there’s much more interlaced content, and where every last drop of available resolution is precious.

    The good news is that progressively flagged content on DVD is fine. That means that almost every American NTSC DVD containing a film will play back without any obvious artefacts on the Sony PS4. Film content that’s been encoded as interlaced, where the studio has passed the duty of interlace-to-progressive conversion onto the consumer’s playback hardware, will display with the aforementioned jaggies, of course magnified owed to the lesser SD resolution. As with HD, there is no film mode detection at all beyond the common reading of MPEG metadata (repeat field flags).

    Adding to the PlayStation 4's suitability as a DVD player – for American/Japanese-centric NTSC content – is its high quality scaling. The PS3's spatial interpolation (literally how new pixels are created to fill the HD resolution from the low-res SD source) was novel for its time, and the PS4 appears to follow much of the same lead but without quite as much a synthetic finish (diagonal edges appear slightly less smoothed over, and you’ll likely never see a hint of aliasing even if you do find one of the few DVDs that has any sharp high frequency detail in it to start with).

    That’s fine for the NTSC territories, but European users will not be too surprised to hear that PAL DVDs are not optimally handled by the Sony PS4. There are several esoteric features inside the DVD spec that allow a disc and the video on it to be marked as interlaced or progressive, but the long and short of it is that none of the PAL discs we tried played back optimally even if the flags on the disc were properly set (in PAL-land, almost none of them are). There is no 2:2 cadence detection for PAL films – in this area the PS4 is beaten by the Xbox One, which does do correct film mode deinterlacing.

    The bottom line: the Sony PlayStation 4 treats all standard-def DVD content except for NTSC progressively flagged DVDs as interlaced, and its deinterlacing is not good. At least, the PS4 doesn’t make the Xbox One’s mistake of outputting 50hz content as 60hz, so doesn’t create judder. Instead, its lack of film mode detection means that PAL DVD – and we imagine many of our readers do have significant DVD collections – displays with lessened vertical resolution when compared to a good standalone.

    Microsoft are also experiencing issues with their Bluray features too , with users reporting a lip sync issue. Some owners are experiencing Xbox One audio problems when playing Blu-ray movies, or lip sync issues as some people have been describing it. However, this problem only occurs when you have the option of 24Hz refresh rate selected.

    Expect more mandatory updates to fix these issues in the very near future.
     
    Last edited by a moderator: Dec 18, 2013

Share This Page

Close