Hi Am using usb pro ( original one-version 0.18 fw) withCK3i to flash 0251 Phat Lite-On with Lt 3.0. Have hooked everything up like always and get drive recognised (in XP) and then use firmware tool to inject dummy bin into LT3.0 etc. However, when I try and write I get this invalid status message. I've included the log below for info. I know this is fairly common but couldn't find a workaround for me. I also note is that the port io indicator on usbpro is red is that right? Also strange that I can't even get the drive recognised in Win 7? Any advice would be much appreciated as doing this for my son! JungleFlasher 0.1.94 Beta (320) Session Started Mon Feb 18 10:04:21 2013 This is a 32 bit process running on 4 x 32 bit CPUs X360USB PRO detected, Version 0.18 Found 1 I/O Ports. Found 0 Com Ports. Found 9 windows drives C: D: E: F: I: R: S: T: U: Found 1 CD/DVD drives F: Loading firmware file D:\xbox Progs\Dummy.bin MD5 hash: 5bdc4010bd8f4a3cb5381ceb098bfad1 Inquiry string found Identify string found Drive key @ 0xA030 B5C976964E1698C1ED3ECE9292DF8AA4 Firmware Osig: [PLDS DG-16D2S 0251] Firmware is: PhatKey Extract Loading firmware file D:\xbox Progs\LTPlus-0251-v3.0.bin MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98 Genuine LT plus v3.0 Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF Firmware Osig: [PLDS DG-16D2S 0251] Firmware is: LT-Plus 3.0 Spoofing Target DVD Key copied to target Target is LT - ID strings not copied to Target Serial data already matches Target rev is LT 02510C, serial info not copied Getting Status from port 0x0000 Invalid Status 0x50 Getting Status from port 0x0000 Invalid Status 0x50
Try again after a reboot and try with the drive tray 1/3 open, erase liteon then power cycle (AS LONG AS YOU HAVE THE DVD KEY!) then you should be able to write the new F/W.
how did you resolve this mate for future refrence for other members who might read this topic and find it helpfull.
