How to Open Nat on Xbox One

BigDdog Jan 4, 2014

  1. BigDdog

    BigDdog Newbie
    0/47

    Joined:
    Apr 14, 2013
    Messages:
    46
    Likes Received:
    22
    Trophy Points:
    0
    Gender:
    Male
    Location:
    Canada
    Console:
    Xbox
    Hey, I see that nothing has been posted here yet. So I figured I'd throw a quick tut on how to get a open nat type for those that don't have it already on their Xbox One.

    First: We will want to set up a static Ip address for your Xbox one.

    If you know your routers address then log right in :)

    If not try this.

    ( Start -> Run -> cmd -> ipconfig)
    [​IMG]

    Your default Gateway will bring you to your router. Most routers default passwords can be found via google.

    Now set up a static Ip address to what ever you would like, It should be under your settings in LAN Setup and save the changes. Make sure to write down what ever one you decide.

    This is mine
    [​IMG]

    Now, Go to your port forwarding tab and add these to the list. With the ip address you just set up and save the changes.


    TCP - 53
    TCP - 80
    TCP - 3074
    TCP - 3478-3480
    UDP - 53
    UDP - 88
    UDP - 500
    UDP - 3074
    UDP - 3544
    UDP - 4500

    Now go into your admin tab or settings and reboot your router.

    Next: Start your Xbox 1.

    Go to [settings | network | advanced settings | Ip settings | and put in your new static ip

    Test your network connection to make sure it works.

    And reset your Xbox One for good measure.

    You should now have a open Nat on Cod and Bf4
     
    • Like Like x 2
  2. he

    henry winkler Gold Member Gold Subscriber
    0/47

    Joined:
    Oct 7, 2010
    Messages:
    250
    Likes Received:
    310
    Trophy Points:
    0
    Console:
    Nintendo
    great tutorial thank
     

Share This Page

Close