This tutorial will tell you how to mod Nazi Zombies for Yourself! Things you will need : WX360 : Download it here. A clean waw iso ABGX : Download here Imageburn : Download here Modded waw files with mod menu : Download here Assuming you have all of these then heres how its done: Open WX360 and browse your pc for your iso. Once you have opened the iso then you will need to extract the Default.xexto your desktop. Open the rar file you downloaded with the modded files inside & extract them to desktop along side the defualt xex you just extracted. Your desktop should now look something like this , Now you must replace the three files you downloaded , with the corresponding files within the iso (inside WX360) To do this you need to find the files and right click on them and select replace one at a time like so , Heres an example of the nazi_zombie_prototype.ff being replaced, Heres an example of the common.ff being replaced , Do the same for the code_post_gfx.ff & then replace the default xex that you extracted earlier. Once all the files have been replaced with the ones from the rar file, you can now exit out of WX360 and run your iso through abgx. If you have done it correctly you will see that all stealth passes the checks. Hope this helps those that needed it.