I have a Blaster CK3 that comes with a Probe and i whant to extract the key of a virgin liteon DG-16D2S that have FW 0251(MS updated from original FW 74850 in dashboard update (13146). The thing is that i read and i need a Probe 3 to do this using the new method PMT. I find a cable to convert a old probe to a probe 3. Is there a tutorial that shows how to make that cable or edit my existing probe to work like probe 3? Thank!
if you buy this cable http://www.modtraders.co.uk/xecuter_probe-3_pmt-conversion-cable.html then that is all you need for whatever probe you may have.
I found that i only have to cut the 3.3v wire in half and connect a switch between the two ends. This is the diagram that i found to know what wire is the 3.3v one.
If you have a old probe you add a switch to it. If u use the wires that came with your probe it will be the one that the brown cable is also going to
Blaster CK3 mini Probe to Probe 3 for PMT method on LiteOn with a switch in 3.3v wire. I did it and it work. Here some pictures: http://flic.kr/p/dwWepi Pointing the pin 6 that have 3.3v for the switch. http://flic.kr/p/dx2JZ3 http://flic.kr/p/dx2Lf9 http://flic.kr/p/dx2L6Y http://flic.kr/p/dx2Kpb http://flic.kr/p/dwWfGT http://flic.kr/p/dwWfgH
can you tell me the process of extracting key with this added switch... turn off switch before touching point? what point suppose to probe?