CR3 Lite Jumper Settings (Thanks to Team-Xecuter)

ADDZ Nov 27, 2012

  1. ADDZ

    ADDZ ( * Y * ) Lifetime Gold XPG Retired Staff TeamXPG
    205/282

    Joined:
    Dec 12, 2010
    Messages:
    15,951
    Likes Received:
    6,688
    Trophy Points:
    595
    Location:
    Behind you sniffing your hair!
    Console:
    Playstation 4
    CR3 Lite Jumper Settings (Thanks to Team-Xecuter)

    [​IMG]

    [​IMG]

    The CR3 Lite comes with an adhesive foam pad and the positioning in pictures below. We changed the security sticker as so many cheap knock offs were ripping off our design. It fits nicely to the 360 faceplate now if you wish
    [​IMG]

    We also used a high quality 48Mhz crystal - once the cheap knock offs hit the market you can be sure they will use the cheap ones which will be very poor performance.


    [​IMG]

    Here are the default settings for the LK Solder Jumpers. As past experience by thousands of users has shown, you should try different settings for your setup until you achieve the best performance. It always helps others to post your own personal results.

    Phat (Non-Jasper)

    LK1 - Short (Disable Crystal)
    LK2 - Open (Enable 10 Ohm on CPU_RST)
    LK3 - Short (C15 Enable)
    LK4 - All Open (Slim Settings)

    Phat (Jasper)

    LK1 - Short (Disable Crystal)
    LK2 - Short (Disable 10 Ohm on CPU_RST)
    LK3 - Short (C15 Enable)
    LK4 - All Open (Slim Settings)



    Slim (Trinity)

    LK1 - Short (Disable Crystal)

    LK2 - Short (Disable 10 Ohm on CPU_RST)

    LK3 - Open (C15 Disable)
    LK4 - Short 1-2 (300pF on CPU_RST to GND)
    or
    LK4 - All Open

    Slim (Corona)

    LK1 - Open (Enable Crystal)
    LK2 - Short (Disable 10 Ohm on CPU_RST)
    LK3 - Open (C15 Disable)
    LK4 - Short 1-2 (300pF on CPU_RST to GND)
    or
    LK4 - Short 2-3 (100pF on CPU_RST to GND)
    or
    LK4 - All Open

    The following CPU RESET CLEANER settings were taken from many users experiences and we compiled all the best settings into one easy board.

    CPU RESET CLEANER (S2 DIP SWITCH)
    To disable set 1 and 5 On and the rest OFF

    You can use a mixture of 234 and 678. 1 and 5 must be set to OFF when using a combo.

    (1) Bypass
    (2) 1K ohm
    (3) 2K ohm
    (4) 3.3K ohm
    (5) Bypass
    (6) 470 pf
    (7) 560 pf
    (8) 680 pf

    PLL_BYPASS CLEANER (S4 DIP SWITCH)

    100nF has always proven great for Jaspers. I personally have success with 680pF. Others have reported their own better results with all the other values.

    (1) N/A
    (2) 680 pf
    (3) 150 nf
    (4) 100 nf (Default - Same as CAP solder Jumper on Rev C)
    (5) 68 nf
    (6) 47 nf

    The wire install and setup is the same as the CoolRunner Rev C.

    DemoN can now directly connect using the ribbon cable that is included with the DemoN (Programming and Enable/Disable feature)

    ROL can be wired directly to one of the front LED's without any diode.

    Jasper:
    [​IMG]

    Trinity:

    [​IMG]


    Corona: - Update: If you are installing to a Corona the yellow wire in the slim pack is too short - use the yellow wire in the phat pack.
    [​IMG]

    Thanks to Ubergeek & Team-Xecuter

    Source link: http://www.xecuter.c...ead.php?t=92428
     
    • Like Like x 3
  2. worrorfight

    worrorfight PS3 & Xbox Recoveries
    0/47

    Joined:
    Feb 26, 2012
    Messages:
    109
    Likes Received:
    14
    Trophy Points:
    0
    Gender:
    Female
    Location:
    Pennsylvania
    Console:
    Xbox
    Thank you ADDZ for telling us!
     
  3. ADDZ

    ADDZ ( * Y * ) Lifetime Gold XPG Retired Staff TeamXPG
    595/752

    Joined:
    Dec 12, 2010
    Messages:
    15,951
    Likes Received:
    6,688
    Trophy Points:
    595
    Location:
    Behind you sniffing your hair!
    Console:
    Playstation 4
    Hated them to start with but have a Falcon RGH2 & Trinity to do soon so we'll see how that goes ;)

    Look here for a collective of info on the CR3 Lite: http://www.xpgamesaves.com/topic/56518-cr3-lite-setups-this-needs-your-input-modders
     
  4. dnq6

    dnq6 Daniel
    0/47

    Joined:
    Sep 24, 2012
    Messages:
    460
    Likes Received:
    91
    Trophy Points:
    0
    Gender:
    Male
    Location:
    Trippa Snippa
    Console:
    Xbox
    Is this So you can extract the cpu key and dad key from any Xbox 360 abducted essentially rgh any Xbox 360?

    Sent from my GT-I9300 using Tapatalk 2
     
  5. XPG Paddy

    XPG Paddy FTP Staff Lifetime Gold
    185/188

    Joined:
    Sep 18, 2011
    Messages:
    6,408
    Likes Received:
    903
    Trophy Points:
    185
    Gender:
    Male
    Location:
    UK
    Console:
    Xbox
    I got my slim trinity with cr3 lite got it booting a while back but might give these settings a try to see if it improves the boot timings
     
  6. splatsters

    splatsters PS3 Section Mod Gold Subscriber
    155/188

    Joined:
    Jan 27, 2010
    Messages:
    4,876
    Likes Received:
    376
    Trophy Points:
    155
    Location:
    In the bush like a pepping tom
    Console:
    Xbox
    With this chip as it is you can only go as far as 14719 But they have made a add on which is in production now
    which they have gotten the cpu and dvd key from all new dash's

    There is another chip in production which will incorporate this add on into 1 chip
    Like this cr3 lite had the cpu cleaner etc incorporated into it when it once was a add on

    So yeh shortly any box can be done Again
     
  7. dnq6

    dnq6 Daniel
    0/47

    Joined:
    Sep 24, 2012
    Messages:
    460
    Likes Received:
    91
    Trophy Points:
    0
    Gender:
    Male
    Location:
    Trippa Snippa
    Console:
    Xbox
    That will bee sickkkkkk

    Sent from my GT-I9300 using Tapatalk 2

     
  8. sensi420

    sensi420 Contributor TeamXPG
    205/282

    Joined:
    May 20, 2012
    Messages:
    2,536
    Likes Received:
    4,926
    Trophy Points:
    205
    Location:
    In your kitchen drinking your MILK!!!
    Console:
    Xbox
    Yeah im looking forward to see what the DGX addon is.
     

Share This Page

Close