Need Support Flashing Slim...

TheHive DPH Nov 25, 2012

  1. TheHive DPH

    TheHive DPH Banned Gold Subscriber
    0/47

    Joined:
    Jul 23, 2010
    Messages:
    1,903
    Likes Received:
    390
    Trophy Points:
    0
    Gender:
    Male
    Location:
    West Midlands
    Console:
    Xbox
    Alright guy's. I've just been Jammy and swapped my PHAT box for a 250GB slim :p
    Managed to get it open and my drive is a Lite-On 16D4S.

    1st question I have is am I right in saying I can Kamikaze the 164DS?

    2nd question is How?

    3rd question is how do I extract the key incase I f**k it up! (I have a USB PRO v2)...

    If u can link me to any tutorials that would be great. I don't have a template to drill. I do have a drill tho and if I can get the key I am willing to risk it if I know exactly where to drill. I have also seen ppl do it with a soldering iron which I am happy to do if it's going to be easier.

    Thanks for any help guy's ;)
     
  2. AD

    ADDZ Guest

    You can extract the key simple right now, slim key then choose not to try unlock it and it will dump, you just need the dummy.bin.

    What F/W Version is the drive?
     
  3. TheHive DPH

    TheHive DPH Banned Gold Subscriber
    0/47

    Joined:
    Jul 23, 2010
    Messages:
    1,903
    Likes Received:
    390
    Trophy Points:
    0
    Gender:
    Male
    Location:
    West Midlands
    Console:
    Xbox
    Sweet, I got the key. FW is 1071 ;)
     
  4. AD

    ADDZ Guest

    1071 can be done but you'll need to open the drive and check the chip on the PCB.

    03X needs a chip
    05X Can be drilled

    *Bottom line.
    [​IMG]


    ...you can buy the PCB unlocked already if you don't want to drill or trace cut/solder yours.
     
  5. TheHive DPH

    TheHive DPH Banned Gold Subscriber
    0/47

    Joined:
    Jul 23, 2010
    Messages:
    1,903
    Likes Received:
    390
    Trophy Points:
    0
    Gender:
    Male
    Location:
    West Midlands
    Console:
    Xbox
    How do I check if it's 03X or 05X bud?
     
  6. AD

    ADDZ Guest

    Open it then look at the bottom line of the chip:

    [​IMG]
     
  7. TheHive DPH

    TheHive DPH Banned Gold Subscriber
    0/47

    Joined:
    Jul 23, 2010
    Messages:
    1,903
    Likes Received:
    390
    Trophy Points:
    0
    Gender:
    Male
    Location:
    West Midlands
    Console:
    Xbox
    HaHa well chuffed. It's 05X :) :) :)

    Im going to give it a go, now if I screw it up I can just buy an unlocked PCB can't I?

    Thanks for the help ADDZ. Helped me out big time ;)
     
  8. AD

    ADDZ Guest

    Yea you have the key so your all good.

    Buy the X-bond tool: http://www.modchip-store.co.uk/X-Bond.html it's not very hard just take your time and the Jungle Flasher will beep at you when you have unlocked it.

    ...some people use a soldering iron to burn through but I've only used a 1mm drill for it.

    Good-Luck.
     
  9. jayt180703

    jayt180703 i think ive broke it
    0/47

    Joined:
    Jul 27, 2011
    Messages:
    1,976
    Likes Received:
    282
    Trophy Points:
    0
    Gender:
    Male
    Location:
    PLAYBOY MANSION .
    Console:
    Xbox
    mate do not use a soldering iron !! theres no need for the xbond tool what i use is a scalpel no need for reisistors and such put the tip of the scalpel on the point click unlock spi status wait for the dots turn scalpel slowly applying light pressure in most cases jungleflasher will beep some do some dont turn gently until you get status 0x00 .

    if you get status 0x3 stop its unlocked close jungleflasher load youre key into firmware tool autoload the lt firmare do not spoof then intro youre drive should see spi status now unlocked click write ..

    hope it goes well ..
     
  10. TheHive DPH

    TheHive DPH Banned Gold Subscriber
    0/47

    Joined:
    Jul 23, 2010
    Messages:
    1,903
    Likes Received:
    390
    Trophy Points:
    0
    Gender:
    Male
    Location:
    West Midlands
    Console:
    Xbox
    Right lads. I have started drilling and got status 0x00. Drive was unlocked but I have a dodgy probe and I knocked it! Had to re-intro the drive but now the drive is locked again! What do I do?
     
  11. jayt180703

    jayt180703 i think ive broke it
    0/47

    Joined:
    Jul 27, 2011
    Messages:
    1,976
    Likes Received:
    282
    Trophy Points:
    0
    Gender:
    Male
    Location:
    PLAYBOY MANSION .
    Console:
    Xbox
    do you have some rubbing alcohol if so rub a bit on the hole it should reunlock or just do the spi procces again but use whatever tool you used the first time to unlock but be very gentle ..

    or if you have no rubbing alcohol ive used nail varnish remover in the past and a tip of a needle.
     
  12. TheHive DPH

    TheHive DPH Banned Gold Subscriber
    0/47

    Joined:
    Jul 23, 2010
    Messages:
    1,903
    Likes Received:
    390
    Trophy Points:
    0
    Gender:
    Male
    Location:
    West Midlands
    Console:
    Xbox
    Could u talk me through what I have to do once I get status 0x00?
     
  13. jayt180703

    jayt180703 i think ive broke it
    0/47

    Joined:
    Jul 27, 2011
    Messages:
    1,976
    Likes Received:
    282
    Trophy Points:
    0
    Gender:
    Male
    Location:
    PLAYBOY MANSION .
    Console:
    Xbox
    when you get status 0x00 assuming that you have got youre correct firmware loaded do not spoof it and all the flash chip properties are still present just click write slim liteons take longer to write the firmware than phats .

    i will usually hit outro around three times

    oh and what i do most people will lock the board back up straight away i test its working first then relock it saves the hassle of having to do it again
     
  14. TheHive DPH

    TheHive DPH Banned Gold Subscriber
    0/47

    Joined:
    Jul 23, 2010
    Messages:
    1,903
    Likes Received:
    390
    Trophy Points:
    0
    Gender:
    Male
    Location:
    West Midlands
    Console:
    Xbox
    I get status 0x00 then when I click write I get spi is locked, aborting!
     
  15. jayt180703

    jayt180703 i think ive broke it
    0/47

    Joined:
    Jul 27, 2011
    Messages:
    1,976
    Likes Received:
    282
    Trophy Points:
    0
    Gender:
    Male
    Location:
    PLAYBOY MANSION .
    Console:
    Xbox
    hmm thats a strange one ill just do some research and get back to you .

    right just been looking on the net and some are saying that the problem is that youve not gone in enough with whatever method youre using youve just as they have wrote just tapped the desired point .

    hmmm id say relock it then spi clear it again but try and go a little further if thats at all possible but only if you think its safe enough for you to do so .
     
  16. TheHive DPH

    TheHive DPH Banned Gold Subscriber
    0/47

    Joined:
    Jul 23, 2010
    Messages:
    1,903
    Likes Received:
    390
    Trophy Points:
    0
    Gender:
    Male
    Location:
    West Midlands
    Console:
    Xbox
    Think it's screwed m8. Doesn't give me the option to lock/unlock any more. Goes to rite but just stays on writing the start of bank 1!
     
  17. xTG_IrOnZzZ

    xTG_IrOnZzZ Banned BANNED
    0/47

    Joined:
    Aug 1, 2010
    Messages:
    4,040
    Likes Received:
    455
    Trophy Points:
    0
    Gender:
    Male
    Location:
    Liverpool
    Console:
    Xbox One
    I just done this lol, had a spare PCB laying around! Never done a slim before

    [​IMG]
    tried to get the epoxy off...failed, so thought Flubber it ill guess :p

    Read, flashed an left unlocked for sale ;)

    And Dave, try putting some Alcohol on your thumb and keep it over the hole while you click write, had problems in the past with a PCB I paid to get unlocked.
     
  18. TheHive DPH

    TheHive DPH Banned Gold Subscriber
    0/47

    Joined:
    Jul 23, 2010
    Messages:
    1,903
    Likes Received:
    390
    Trophy Points:
    0
    Gender:
    Male
    Location:
    West Midlands
    Console:
    Xbox
    So u got this 4 sale?
     
  19. jayt180703

    jayt180703 i think ive broke it
    0/47

    Joined:
    Jul 27, 2011
    Messages:
    1,976
    Likes Received:
    282
    Trophy Points:
    0
    Gender:
    Male
    Location:
    PLAYBOY MANSION .
    Console:
    Xbox
    nice 1 ironzz did u use a scalpel ??? what i usually do to get the point right is ive got a pic of one done on my laptop so i enlarge it and go off that it does help having it in front of you just to guide you .
     
  20. xTG_IrOnZzZ

    xTG_IrOnZzZ Banned BANNED
    0/47

    Joined:
    Aug 1, 2010
    Messages:
    4,040
    Likes Received:
    455
    Trophy Points:
    0
    Gender:
    Male
    Location:
    Liverpool
    Console:
    Xbox One
    I used a crafting knife, had my ipad next to me with the image zoomed in, started the hole just slightly SE of the tip of the 'K'

    Surprised it worked seeing as I guessed lol.

    Dave - Ill sell it to you if you want, entirely up to you pal.
     

Share This Page

Close